Installation Instructions
Please Read the Manual Carefully Before Installa-
tion
Please note
Electrical connection
The oven is fitted with a plug and must only be
connected to a properly installed earthed socket. The
socket must only be installed and the connecting
cable must only be replaced by a qualified electrician,
and in accordance with the appropriate regulations. If
the plug is no longer accessible following installation,
an all pole isolating switch must be present on the
installation side with a contact gap of at least 3 mm.
The fitted cabinet must not have a back wall behind
the appliance.
Minimum installation height: 85 cm.
Do not cover ventilation slots and suction holes.
Note: Do not trap or bend the power cable.
Screw
Mounting Plate
Installation Manual
Screw cover
To Next Page
Loading...