MAINTENANCE
Technical Specifications
MAX.Current
10A
Standard Water Pressure
0.05MPa~1MPa
Power Supply
220-240V~, 50Hz
H
W
D
(W*D*Hmm)
Rated
Power
Washing
Capacity
Model
SELLA70
SELLA80
7.0kg
8.0kg
595*495*850
595*565*850
2050W
2000W
60kg
68kg
Dimension
Net
Weight
MAINTENANCE
Customer service
In case of questions please contact our customer service at
asistencia.easelectric.es
！
Warning!
Risk of electric shock
• Never try repair an appliance which is defective of presumed to be
defective. You may put your own and future users' lives in danger.Only
authorised specialists are allowed to carry out this repair work.
• Improper repair will void the warranty and subsequent damages can't
be recogniced!
Transport
IMPORTANT STEPS WHEN MOVING THE APPLIANCE
•Unplug the appliance and close the water inlet tap.
•Check, if the door and the detergent dispenser are closed properly.
•Remove the water inlet pipe and the outlet hose from the house
installations.
•Let the water drain completely from the appliance (see “Maintenance
Cleaning the drain pump filter”)
•Important: Re-install the 4 transport bolts in the back of the appliance.
•This appliance is heavy. Transport with care. Never hold any protruding part
of the machine when lifting. The machine door cannot be used as a handle.
To Next Page
