26
sence of dermatological conditions such
as severe acne, burns, infections or more.
Do not use the brush (B) if the filaments
are deformed or damaged.
CLEANING
LAMINA GROUP CLEANING WITH 3 RO-
TATING HEADS
At the end of each use it is recommended
to clean the foil group with the 3 rotating
heads (F) using the brush (M) supplied.
Make sure that the appliance is turned off
and unplugged from the power socket.
By pressing the button (T) located on the
front of the 3-head rotary foil assembly
(F), it opens and allows for hair removal.
For a more thorough cleaning, it is pos-
sible, after having removed the sheet as-
sembly (F) from the body of the appliance
(see the accessories removal paragraph)
and opened with the button (T), rinse it
under running water.
ATTENTION: the water temperature must
not exceed 60 ° C / 70 ° C.
Do not dry the rotating heads of the foil
unit (F) with towels, tissues or absorbent
paper.
At the end of the operation, close the she-
et assembly (F) and reassemble it on the
body of the appliance (see accessories as-
sembly paragraph).
After prolonged use of the shaver, the
3-head foil (F) can be cleaned with a disin-
fectant liquid (eg alcohol).
When carrying out this type of cleaning
it is useful to lubricate the 3 rotating he-
ads of the foil unit (F) with a few drops of
sewing machine oil.
(see fig. 14-15-16)
CLEANING ACCESSORY FOR NOSE / EARS
AND SIDEBURN / MUSTACHE TRIMMER
At the end of each use it is recommended
to clean the accessory (C) o (D).
Make sure that the appliance is turned off
and unplugged from the power socket.
Remove the hairs that have accumulated
in the head (C) o (D) with the brush (M)
supplied or simply by blowing.
For a deeper cleaning it is possible to
wash the accessory (C) o (D) under run-
ning water (the water temperature must
not exceed 60 ° C / 70 ° C) after having
removed it from the body of the appliance
(see the paragraph on removing accesso-
ries ).
N.B. after prolonged use of the accesso-
ry (C) o (D) it is recommended to lubrica-
te the cutting teeth with a few drops of
sewing machine oil.
When the operation is completed, reposi-
tion the accessory (C) o (D) on the body
of the appliance (see accessories assembly
paragraph).
ATTENTION:
the accessory (C) for nose/ears can be
divided into 2 parts for a more thorough
and easy cleaning. Rotate the top counter-
clockwise (to the left) and detach the print
head from its holder. With the brush (M)
supplied remove the hair that has accumu-
lated. When the operation is completed,
refit the accessory head (C) on its support
and lock it by turning it clockwise (to the
right) until you hear a click.
(see fig. 17-18-19)
FACE BRUSH CLEANING
Make sure that the appliance is turned off
and unplugged from the power socket.
Remove the brush (B) from the appliance
body (see the accessories removal para-
graph), divide the head from the brush
base. And clean thoroughly with hot water
(max 40 ° C / 50 ° C) and soap.
Dry everything with a cloth. This is recom-
mended after each use to ensure optimum
performance at all times.
After completing the cleaning operation,
re-attach the brush head to the base. And
replace the accessory (B) on the applian-
ce body (see accessories assembly para-
graph). (see fig. 20)
CLEANING THE APPLIANCE BODY
Do not use abrasive products or substan-
ces or harsh detergents, such as alcohol
or acetone.
Clean the body of the appliance after each
use with water or a soft cloth.
To Next Page
Loading...