3 Place child in restraint in
seated position, rmly against both the
back and bottom of the restraint.
Child must be dressed in clothing that
allows the harness to rmly secure them.
See note on next page.
4 Place buckle tongues into the quick
release buckle.
Securing a Child in the Restraint - Securing the Harness
Securing a Child in the Restraint - Adjusting the Harness
5 Tighten harness by pulling on the ad-
juster strap at the front of the restraint.
Note: you may need to pull excess
shoulder strap webbing through the Quick
Release Buckle Tongues upward towards
the child’s shoulder and then pull on
the adjuster strap. This may need to be
repeated several times to get the webbing
tting snugly.
IMPORTANT
Shoulder Straps must be a firm or
snug fit and must not be twisted.
Infants need to be securely held by
the harness. An infant wrapped in
a blanket or swaddled will not be
securely held and may be ejected
and killed in an accident
Do not bind or wrap the infants
arms or legs together.
“CLICK”
IMPORTANT:
The buckle tongue pushed in last
should “CLICK” when it locks into
place. If it does not click, try again
or try cleaning the buckle.
See page 39.
3
4
5
WARNING
DO NOT LEAVE CHILDREN
UNATTENDED IN THE CAR
To Next Page
Loading...
Need help?
General
