Refit Cover
To Refit
1. Place the main cover into the seat and
thread the QR buckle through the slot in
the cover, and move the harness lap
straps into the slots in the cover A.
2. Secure the press studs B & C.
3. Fit the headrest cover over the headrest
and ensure that the shoulder straps are in
the slots between headrest and upper
backrest pad E.
4. Secure the press studs F and elastic
loop fasteners G (one is inside the shell) .
F
B
B
A A
E
E
G
G
C
The Next Restraint
This restraint is suitable for a child of av-
erage size up to approximately four years
of age.
When the child has outgrown this re-
straint, the next suitable type of restraint
is a booster seat.
IMPORTANT: Children are at risk of seri-
ous injury if they move to booster seats
too early.
Children that have outgrown this restraint
are safest in a booster seat until their
shoulders reach the upper shoulder height
marker of the booster seat.
To Next Page
Loading...
Need help?
General
