Securing a Child in the Restraint - Securing the Harness
FIRST CHECK SHOULDER STRAP
HEIGHT AND ADJUST IF NECESSARY.
See page 23
1 Loosen harness by pressing on ad-
juster button while pulling on the harness
straps.
2 Press button to open the
quick release buckle. Spread harness
straps apart.
3 Place child in restraint in
seated position rmly against both the
back and bottom of the restraint.
4 Place buckle tongues into the quick
release buckle.
Securing a Child in the Restraint - Securing the Harness
“CLICK”
1
2
3
4
IMPORTANT:
The buckle tongue pushed in last
should “CLICK” when it locks into
place. If it does not click, try again
or try cleaning the buckle.
See page 39.
To Next Page
Loading...
