19 20
see images
33
-
42
Your infant child restraint is designed to attach to certain Joie
stroller models featuring a special tray, armbar or calf support.
!
Please make sure your stroller can fit the infant child
restraint before purchasing it.
!
Never allow more than one baby in the travel system at
one time.
!
Please brake your stroller before assembling the infant
child restraint.
!
Check that the parts used to fix the infant child restraint
are securely fastened on the stroller.
!
Recline the stroller seat back to the lowest position.
Use with Joie Strollers
To assemble the infant child restraint on Joie strollers, please
follow these steps:
1. Place child restraint into stroller so notches in rockers fit over
edge of armbar, tray or calf support. The child restraint will
then automatically click into place.
33
&
34
&
35
&
36
! If armbar has fabric cover, please detach the Velcro on
armbar cover first.
35
-1
! For the stroller with a special calf support, please adjust
the calf support to the vertical position, detach the
Velcro, and then lift the fabric cover.
36
-1
Use with Strollers
2. Use the straps on both sides of stroller to fix the child
restraint.
37
&
38
&
39
! Try pulling the child restraint upwards to check that it is
fitted correctly.
To remove the child restraint, release the straps from the child
restraint, pull up the stroller release handle to release the child
restraint from tray, armbar or calf support, and then lift child
restraint out of stroller. Please refer to
40
&
41
&
42
.
33
34
35
1
36
1
To Next Page
Loading...
Need help?
General
