36
Using Accessories:
For information about using the car seat, refer to the
instruction manual included with the car seat.
Using with Joie Car Seat
1 -
To use with a Joie car seat, first remove the stroller seat.
Squeeze the seat release buttons (A) while lifting the seat
(B). See page 32 for more detailed instructions.
2 - Attach the included car seat adapters to the seat mounts.
A “clicking” sound will confirm that the adapters are
properly locked in place.
3 - Attach the car seat by placing the car seat onto the
adapters. A “clicking” sound will confirm that the
car seat is properly locked in place.
4 - To remove the car seat, first press the car seat release
buttons (C), and then lift the car seat upwards (D).
5 - To remove the adapters, pull out the release tabs (E) then
lift the adapters upwards (F).
IMPORTANT: Do not fold the stroller when the car seat
is still attached.
Fall Hazard: Always check that the car seat is securely
attached to the stroller by pulling up on the car seat.
Always secure your child with the car seat harness when
using the car seat.
Use stroller only with Joie car seats.
To Next Page
Loading...
