Joie i-Base 2 User Manual

19 20
WARNINGS
!
Only use this infant child restraint on vehicle seats that are
fully padded and are free of sharp objects.
!
Make sure that no part of the child restraint become
trapped by a movable seat or in a door of the vehicle.
!
DO NOT continue to use this infant child restraint or base
after they have suffered any violent crash. Replace immedi-
ately as there may be invisible structural damage from the
crash.
!
Remove this infant child restraint from the vehicla seat
when it is not in use for a long period of time.
!
Consult the distributor for issues concerning maintenance,
repair and part replacement.
!
To avoid the risk of falling out, always secure the child
using the safety harness when the child is placed in infant
child restraint, even when the infant child restraint is not in
the vehicle.
!
Before carrying the infant child restraint by hand, ensure
that the child is fastened with the safety harness, and that
the handle is correctly locked in a vertical position.
!
DO NOT use the infant child restraint on the tables, chairs
or other elevated surfaces.
!
Do not place any objects in the load leg area in front of
your base.
!
DO NOT use any load bearing contact points other than
those described in the instructions and marked in the child
restraint.
!
Frequently check the ISOFIX guides for dirt and clean them
if necessary. Reliability can be effected by ingress of dirt,
dust, food particles etc.
Emergency
In case of emergency or accidents, it is most important to have your
child taken care of with first aid and medical treatment immediately.
Product Information
for Seat with Base
For Installation with 3-point-belt or ISOFIX System
1. The Joie Child Restraint with Base is a "Semi Universal Child
Restraint". Suitable for installation on vehicle seat.
2. Seat positions in other cars may also be suitable to accept this child
restraint. If in doubt, consult either the child restraint manufacturer
or the distributor.
For Installation with ISOFIX System
1. This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved
to CNS 11497 for general use in vehicles fitted with ISOFIX
anchorages systems.
2. It will fit vehicles with positions approved as ISOFIX positions (as
detailed in the vehicle handbook), depending on the category of
the child seat and of the fixture.
3. The mass group and the ISOFIX size class for which this device is
intended is: Group 0+: C and D
Materials Plastics, metal, fabrics
Patent No. Patents pending

Joie i-Base 2 Specifications

General

Brand	Joie
Model	i-Base 2
Category	Stroller
Language	English