29
STROLLER OPERATION
Use Accessories
Fig. 27.1 Head Support Fig. 27.2 Shoulder Harness Cover
Fig. 27.3 Crotch Harness Cover Fig. 27.4 Armbar Cover
Fig. 27.5 Rain Cover Fig. 27.5 Boot (Selective Purchase)
Not all accessories are included on some models.
Use Shoulder Harness Cover and Crotch Harness Cover
The shoulder harness cover or crotch harness cover can be removed from the
webbing. To assemble shoulder harness cover and crotch harness cover in
reverse steps.
Use Rain Cover
Open canopy and place rain cover over the stroller, and snap into place.
(Fig. 28)
!
When using the rain cover, please always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and
dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during
hot weather.
Use Boot (Selective Purchase)
The soft boot can provide your child with a warm and comfortable sleeping
environment.
Assemble the boot by following these steps.
1. Adjust the calf support and backrest to level position and recline position
respectively before assembling boot.
2. Cover the calf support with boot. (Fig. 29.1)
3. Wrap the webbings on the boot around the canopy mounts, and then
snap buttons. (Fig. 29.2)
The assembled boot is shown as Fig. 29
Note
To Next Page
