To Next PageTo Next Page
Need help?Do you have a question about the Joie spin 360 signature and is the answer not in the manual?
General| Installation | ISOFIX |
|---|---|
| Testing Certification | ECE R44/04 |
| Group | 0+/1 |
| Type | Rotational Car Seat |
| Rotation | 360° |
| Harness System | 5-point harness |
| Cover | Removable and washable |
| Usage | Birth to 18kg, approx. 4 years |
| Rearward Facing | Yes (0-18 kg) |
| Forward Facing | Yes (9-18 kg) |
Child weight limits and recommended facing mode for safety.
Ensuring proper adjustment and fit of all child restraint straps.
Procedure for child restraints subjected to impact or stress.
Risks of unauthorized alterations and heat damage from sun exposure.
Warnings on damaged restraints, swaddled children, and unsecured seats.
Precautions concerning vehicle airbags and using second-hand seats.
Notes on misuse, extra padding, and front seat placement.
Immediate actions for child safety in emergencies or accidents.
Details on ISOFIX system approval and vehicle compatibility.
Overview of rear-facing and forward-facing modes by child weight.
Steps for correctly placing and securing the child restraint base.
Using guides and adjusting ISOFIX connectors for proper installation.
Ensuring ISOFIX connectors are attached and locked correctly.
Proper installation and checks for the load leg indicator.
Steps to detach the child restraint base from the vehicle.
Adjusting the seat recline for optimal child comfort and safety.
Adjusting head support and shoulder harness height.
Steps to install the child restraint in rear-facing mode.
Adjusting harnesses and buckles for the child.
Proper use of the infant insert for side impact protection.
Securing the child with the harness and ensuring correct strap length.
Steps to install the child restraint in forward-facing mode.
Adjusting the harness for a secure fit in forward-facing mode.
Ensuring correct harness height and fit for the child.
Instructions for removing the seat cover and soft goods.
Washing guidelines for the seat cover and padding.
Warnings against ironing, bleaching, and using harsh chemicals.
Proper storage and handling to prevent damage.
Visual guidance on seat placement and airbag warnings.
Choosing between rear-facing and forward-facing modes.
Extending the base support leg for proper setup.
Using guides for easy and safe ISOFIX connection.
Ensuring connectors are locked and indicators show green.
Correctly positioning and checking the load leg indicator.
Procedures for detaching the base from the vehicle's ISOFIX.
Adjusting the seat back angle for optimal comfort.
Setting the correct height for headrest and shoulder straps.
Installing the seat for rear-facing use (0-4 years).
Verifying shoulder strap height for proper child fit.
Unlocking and securing the child's harness buckles.
Using the infant insert for enhanced side impact protection.
Steps for installing the seat in forward-facing mode (1-4 years).
Adjusting harness length for secure forward-facing fit.
Important note: do not use infant insert in forward-facing mode.
Steps to remove and reattach the seat cover and padding.
Washing guidelines for the seat cover and padding.
Warnings against ironing, bleaching, and using harsh chemicals.
Proper storage and handling to prevent damage.
