19 20
Securing Child
After the child is placed into the seat,
check whether the Shoulder Harness
Straps are at proper height.
1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the proper
length.
32
2. Unlock the buckle of the harnesses
by pressing the red button.
33
3. Fix the buckles on the both sides
of seat to make placing the child in
forward facing mode more
convenient.
34
4. When installing the child restraint in
the forward facing mode, do not use
the infant insert.
5. Place the child into the child
restraint and pass both arms
through the harnesses. Engage
the buckle.
32
33
34
! After the child is seated, recheck
whether the shoulder harnesses
are at the proper height.
6. Pull down the adjustment webbing
and adjust it to the proper length to
make sure your child is properly
secured.
35
! Make sure the space between the
child and the Shoulder Harness
Straps is about the thickness of
one hand.
7. If steps
32
&
33
&
34
are taken when
arriving at your destination whilst
removing the child, then the
harness will be positioned so that
it is out of the way and ready for
loading upon your return to the
vehicle.
35
see images
36
-
42
Press the red button to disengage the
buckle.
36
Follow steps
37
-
42
to detach soft
goods.
To attach seat pad soft goods or
summer seat soft goods, please follow
the steps above in reverse order.
Detach Soft Goods
goods
36
To Next Page
Loading...
Need help?
General
