EasyManuals Logo

Joie spin 360 signature User Manual

Joie spin 360 signature
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
11 12
11
1
2
12
Removing the base
To remove from the vehicle press
the ISOFIX adjuster button
10
-1 and
pull the base back from the seat.
10
-2
Then press and release the
connectors from the vehicle’s
ISOFIX.
11
To prevent damage during transit,
press the ISOFIX adjuster button
12
-1 and fold the connector
completely.
12
-2
see images
13
-
14
Squeeze the recline adjustment
button
13
, to adjust the child
restraint to the proper position. The
recline angles are shown as
14
Recline Adjustment
13
10
1
2
1
2
14
Height Adjustment
for Head Support and Shoulder Harnesses
Please recheck the load leg position
after reclining.
Limit to use the most reclined
position (1st position) with rear
facing mode.
There are 5 recline positions for rear
facing mode and 5 recline positions
for forward facing mode.
see images
15
-
17
1. Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to
15
! When used rear facing, the
shoulder harness height must be
even with child’s shoulders.
15
! When used forward facing, the
shoulder harness height must be
even with child’s shoulders.
15
15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Joie spin 360 signature and is the answer not in the manual?

Joie spin 360 signature Specifications

General IconGeneral
BrandJoie
Modelspin 360 signature
CategoryCar Seat
LanguageEnglish

Related product manuals