MAINTENANCE
Your Saw Train is designed to give many years of virtually maintenance-free
operation. An occasional cleaning is all you need to do to keep the tool in top
shape. Remove the Sliding Bridge and fence from saw, invert and clean the
rubber clamping pads of any dust buildup or grime. A light application of
paste wax to the top surface of the rails from time to time will keep the rails
smooth and clean.
OPTIONAL SAW TRAIN ACCESSORIES
EXTENSION TABLES WITH ROUTER PLATE CUTOUT
27 x 28 x ¾ Solid Phenolic STT-2728P
27 x 36 x ¾ Solid Phenolic STT-2736P
27 x 48 x ¾ Solid Phenolic STT-2748P
27 x 28 x 1-1/8 Melamine MDF STT-2728M
27 x 36 x 1-1/8 Melamine MDF STT-2736M
27 x 48 x 1-1/8 Melamine MDF STT-2748M
28 x 48 x 1-1/8 Melamine MDF STT-2848M
(Solid phenolic tables include special brackets that allow
expansion to fit saws from 27” to 28”)
EXTENSION TABLES WITH NO CUTOUT (BLANK)
27 x 28 x ¾ Solid Phenolic STT-2728PB
27 x 36 x ¾ Solid Phenolic STT-2736PB
27 x 48 x ¾ Solid Phenolic STT-2748PB
27 x 28 x 1-1/8 Melamine MDF STT-2728MB
27 x 36 x 1-1/8 Melamine MDF STT-2736MB
27 x 48 x 1-1/8 Melamine MDF STT-2748MB
28 x 48 x 1-1/8 Melamine MDF STT-2848MB
(Solid phenolic tables include special brackets that allow
expansion to fit saws from 27” to 28”)
ROUTER PLATE INSERTS, 3/8” LAMINATED PHENOLIC
Blank insert RP-00
Insert with 2” hole RP-20
Insert with 3-5/8” hole RP-36
3-ring universal plate RP-60
Universal, all aluminum plate RP-99
4-pc ring set for RP-99 & RP-60 RL-4RS
27” X 28” FLOATING EXTENSION ROUTER TABLE
Complete with: SFT-2728M
STT-2728M Router Extension Table
Pair of 28” Saw Train Rails
Mounting hardware, “living” rail connector and
alignment/guide pins with clamps.
Pair of Telescoping Legs (STL-1)
Also available without router cutout: SFT-2728MB
Solid Phenolic with cutout SFT-2728P
Solid Phenolic without cutout SFT-2728PB
27” X 17-1/2” FLOATING ROUTER TABLE
Complete with: SFT-2717M
17-1/2” x 27” Extension Table
Pair of 17-1/2” Saw Train Rails
Mounting hardware, “living” rail connector and
alignment/guide pins with clamps
Pair of Telescoping Legs (STL-1)
Also available without router cutout: SFT-2717MB
Solid Phenolic with cutout SFT-2717P
Solid Phenolic without cutout SFT-2717PB
PAIR, FLOATING TABLE EXTENDER BARS
12” length w/clamping knobs SEB-12
32” length w/clamping knobs SEB-32
RAIL ALIGNMENT & GUIDE PIN SET SGA-1
CLINCHER FENCE MACHINES
12 ½“ positioning range CL-12
18 ½” positioning range CL-18
26 ½” positioning range CL-26
SMARTFENCE
®
32” length SF-32
38” length SF-38
CABINETMAKER’S SYSTEMS
CL-12 & SF-32 JCM-1232
CL-12 & SF-38 JCM-1238
CL-18 & SF-32 JCM-1832
CL-18 & SF-38 JCM-1838
CL-26 & SF-32 JCM-2632
CL-26 & SF-38 JCM-2638
TABLE FEATHER BOARD
Dual level w/2 feathers ST-FB
TELESCOPING LEGS, PAIR STL-1
-10-
To Next Page
Loading...