3
Safety instructions
(7) Spare parts must meet the technical requirements specified by
the manufacturer. This can only be guaranteed with original JO-
KE spare parts.
(8) Any work on/with the device may only be carried out by quali-
fied, appropriately trained and authorised personnel. Pay atten-
tion to minimum statutory age limits!
CAUTION!
(9) Wear safety goggles when working with the handpiece for rotat-
ing movements
.
(10)
Personnel undergoing training or in a general apprenticeship
should only be allowed to work with the machine under the
constant supervision of an experienced operator!
!
(11)
Restrain from any type of work that could jeopardise your safety.
(12) The device may only be used if all protective and safety equip-
ment is in place and in proper working order
.
(13)
Do not leave the device unattended when switched on!
(14) Stop and secure the device immediately in the event of mal-
functions! Faults must remedied at once
.
JOKE
®
Instruction Manual Multimaster Grinding and Polishing System 5
To Next Page
Loading...
Need help?
General