6
Cleaning and care
JOKE
®
Instruction Manual Multimaster Grinding and Polishing System 9
To avoid any risk of injury from the machine being inadvertently switched
on, pull the plug out before doing any service work on it.
CAUTION!
The following routine service work should be carried out once a
week, or more often if the machine is used frequently:
1. Clean the openings for the cooling air
2. Blow the motor compartment clean from the outside with
dry compressed air.
CAUTION!
Maintenance and repair work must not be carried out by anyone
other than your JOKE
-Service team.
To Next Page
Loading...
Need help?
General