17
18
To prevent tipping, never let child climb the pram/stroller.
To avoid finger entrapment or injury to the body, use care
when folding and unfolding the pram/stroller.
Be sure the stroller is fully open or folded before allowing
child near the pram/stroller.
Check that the infant child restraint attachment device is
correctly engaged before use.
To avoid strangulation, do make sure your child is clear
from the canopy.
Discontinue using your pram/stroller if it is damaged or
broken.
Pram/stroller to be used only at walking speed. This
product is not intended for use while jogging.
To avoid suocation, remove plastic bag and packaging
materials before using this product. The plastic bag and
packaging materials should then be kept away from babies
and children.
This product is not suitable for running or skating.
Stroller designed to be used from birth shall recommend
the use of the most reclined position for new born babies.
The parking device must be engaged when placing and
removing children.
Bassinet is only suitable for a child who cannot sit up
unaided, roll over and cannot push itself up on its hands
and knees. Maximum weight of the child: 9kg.
Bassinet is not to be used for long term sleeping.
Do not use or add any mattress other than the one
supplied with the bassinet.
Please ensure that the storage latch has been properly
locked, before lifting or moving the vehicle.
The vehicle is not to be used as an unsupervised sleeping
environment.
The brakes must always be applied when the pram/stroller
is not moving.
For infant child restraint used in conjunction with a chassis,
this vehicle does not replace a cot or a bed. Should your
child need to sleep, then it should be placed in a suitable
pram body, cot or bed.
Stroller Assembly
Please read all the instructions in this manual before assembling and
using this product.
Open Stroller
Separate storage latch from storage latch mount
1
, and then lift the
handle upwards
2
, a click sound means the stroller is open completely.
Press the recline handle on the back of backrest to rotate the backrest to
vertical position.
3
! Check that the stroller is completely open before continuing.
Assemble Front Wheels
Assemble front wheels to front legs. Check that wheels are securely
attached by pulling on wheel assemblies.
4
To disassemble front wheel,
detach front wheel from front leg
5
- 2 while pressing the release button.
5
- 1
Assemble Rear Wheels
Assemble brake assembly to rear legs
6
, assemble rear wheels to brake
assembly
7
. Pull the basket tube backward and wrap the connecting tube
of rear legs with the flap of the storage basket, and then snap the three
buttons
8
- 1.
! Check that wheels are securely attached by pulling on wheel assemblies.
To disassemble rear wheel, detach rear wheel from rear wheel mount
7
- 2
while pressing the release button.
7
- 1
Assemble Armbar
Align the armbar ends with the armbar mounts, and then insert to lock.
9
To disassemble armbar, press armbar release button
10
- 1, and then pull
out the armbar.
10
- 2
To Next Page
Loading...
General