Use with Joie Child Restraint
When using with Joie child restraint gemm, i-Gemm please refer to the
following instructions.
1. To attach adapter, place adapter onto mounts as show
33
, A “click”
sound means the adapter is locked completely.
34
2. To attach child restraint, place child restraint onto adapter as show
35
,
A "click" sound means the child restraint is locked completely.
36
3. To remove child restraint, lift the child restraint upwards
37
- 2 while
pressing the two stroller fix release buttons A.
37
- 1
! If you have any problems about using the stroller and the adapter,
please refer to their own instruction manuals.
! To remove adapter, lift the adapter upwards
38
- 2 while pressing the
two release buttons.
38
- 1
! Remove the adapter show as
39
! Please don’t fold stroller when attaching the child restraint.
Use Bassinet
You can use this bassinet with the chrome DLX (S1201) stroller.
Bassinet Assembly
1. Please ensure the 2 support mounts are securely attached.
40
41
! To release the support mounts, please see image
41
2. Please ensure that both attachment mounts, located on the sides, are
securely attached.
42
43
! To release the attachment mounts, please see image
43
- 2
3. Place the inner mattress and zip the zipper.
44
45
4. Pull up the canopy as illustrated while pressing the buttons on both
sides.
46
- 3
Check to make sure the handle is secure before placing the child in the
bassinet.
46
- 1
! Please make sure that the handle is in the correct position of use
before carrying or lifting.
5. Attach the loop and hook fasteners on the bottom of bassinet.
47
A storage compartment is inside of the bassinet.
47
- 1
! Always use the mattress when using the bassinet.
48
! Mattress cover can easily be removed.
6. Place the apron onto the top of the bassinet, and attach at the loop
and fasteners.
49
! Using the apron in cold weather will help give baby a more warm and
comfortable sleep environment.
7. The completely assembled bassinet is shown as
50
! To disassemble the bassinet simply reverse the steps above.
8. Place the bassinet directly down until it latches into place.
51
9. The bassinet is securely attached with a positive “click”.
52
! Always remove the seat before using the bassinet.
! Please don’t fold the stroller when the bassinet is still attached.
! The bassinet can be used with chrome DLX.
10. Remove Bassinet
Press each release side button as shown
53
- 1, whilst lifting up the
handle simultaneously.
53
- 2
11. Unzip the zipper to remove the canopy soft goods.
54
23
24
To Next Page
Loading...
General