Need help?Do you have a question about the Jolida JD 302CRC and is the answer not in the manual?
Covers reading and following safety instructions, heeding warnings, and retaining the manual.
Focuses on power sources, grounding, cords, fuses, overloading, and lightning protection.
Guidelines for placing the amplifier in suitable environmental conditions, avoiding water and heat.
Instructions on how to position the amplifier for optimal use, ventilation, and safety.
Proper methods for cleaning the amplifier using a damp cloth, avoiding harsh chemicals.
Details on when to seek professional service, object entry, and damage assessment.
Guidance on using correct replacement parts and safe tube replacement procedures.
Introduction to the JD 302CRC, its design, features, and basic system requirements.
Information on the amplifier's handcrafted construction, testing, and quality assurance.
Safety precautions and tips for handling vacuum tubes, similar to incandescent bulbs.
Instructions for retaining original packaging and safely unpacking the unit.
Step-by-step guide for installing vacuum tubes, emphasizing correct alignment and care.
Instructions for connecting the amplifier, initial power-up, warm-up, and safe on/off sequence.
Detailed description of each front panel control: Power, Bypass, Volume, Selector, and Input Jack.
Guide to rear panel jacks for audio input, speaker output, grounding, and AC power.
Details on the four-button remote: Standby, Volume Up/Down, and Mute.
Diagram showing the specific locations (V1-V8) for vacuum tubes on the top panel.
Step-by-step guide for safely removing and installing vacuum tubes, including cooling time.
Explanation of factors affecting bias, when to adjust, and consequences of incorrect settings.
Detailed instructions for biasing the amplifier using a multimeter and test ports.
Identifies common mistakes in biasing and how to avoid them, like probe placement and screw sensitivity.
Information on safe servicing, high voltage warnings, and recommended tube types for replacement.
Details on who is protected, what is covered, and how to obtain warranty service.
Comprehensive list of technical data including power output, frequency response, impedance, and dimensions.
Highlights key construction elements like transformers, inputs, components, and feedback design.
To Next Page
General
