Why is the flame very inconsistent in my Jolly Mec Indoor Fireplace?
If the flame in your Jolly Mec Indoor Fireplace is very inconsistent, check the bottom of the pellet container for large deposits of sawdust. Also, the gear motor may have broken gearings.
Why doesn't my Jolly Mec Indoor Fireplace remote control work?
If the remote control for your Jolly Mec Indoor Fireplace isn't working, first check that the batteries are not dead and are inserted correctly. Then, point the remote control at the emergency console. Also, make sure the fireplace is powered up and the display is working.
How to turn on the Emergency Console on Jolly Mec JOLLY SYNTHESIS 68-80 Indoor Fireplace?
If the Emergency Console of your Jolly Mec Indoor Fireplace is not on, check that the fireplace plug is securely inserted in the mains socket and the socket at the back of the fireplace. Also, check that the FLAT cable is connected to the electronic circuit board correctly, and that the protection fuses are working efficiently, including those connected to the electronic circuit board and those in the fireplace socket.
Why does the exchange fan air smell of smoke in my Jolly Mec Indoor Fireplace?
If the exchange fan air smells of smoke in your Jolly Mec Indoor Fireplace, check the exchange fan, as it might be dirty.
Why is the exchange fan noisy in my Jolly Mec JOLLY SYNTHESIS 68-80 Indoor Fireplace?
If the exchange fan in your Jolly Mec Indoor Fireplace whistles or is very noisy, check the exchange fan, as it might be dirty.
General| Category | Indoor Fireplace |
|---|---|
| Brand | Jolly Mec |
| Model | JOLLY SYNTHESIS 68-80 |
| Fuel Type | Wood |
| Flue Diameter | 150 mm |
| Width | 80 cm |
To Next Page