EasyManua.ls Logo

Jolly X-7 Coupe - User Manual

Jolly X-7 Coupe
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER MANUAL
7
Version:1.1
Question and Answer IconNeed help?

Do you have a question about the Jolly X-7 Coupe and is the answer not in the manual?

Summary

Open-Package Guidelines

Safety Instructions

General Safety & Qualification

Be qualified and follow manual instructions for installation and maintenance.

Electrical Safety Warning

Caution about high voltage and dangerous electric shock when touching wires.

Eye Safety & Object Distance

Avoid looking into the light source; maintain minimum distance to illuminated objects.

Photobiological Safety Warning

Warning about light source/beam, maintain safe distance from the beam.

Lamp Handling & Replacement

Guidelines for lamp replacement, including safety, lifespan, and maintenance.

Operating Determinations

General Operation Conditions

Device is for indoor use; avoid temperature fluctuations and operating without a lamp.

Ignition Safety

Never ignite lamp with open housing to avoid explosion and radiation.

Qualified Operation & Modifications

Operate only by qualified persons; unauthorized modifications are forbidden.

Rigging the Fixture

Mounting & Installation Safety

Follow national norms, ensure 10x weight capacity, use secondary safety attachment.

Expert Approval & Inspections

Installations need expert approval and periodic inspections.

Overhead Rigging Expertise

Overhead rigging requires expertise in load limits, materials, and safety inspections.

Fixture Placement & Safety Rope

Fixture placement on floor or rigged; use safety rope for overhead use.

Safety Chain;Cord Attachment

Fasten safety chain/cord using chassis cutouts; must hold 10x fixture weight.

Power Supply Connection & Cut Off

Power Cord Connection

Connect the light source to the main power source with the power cord plug.

Power Supply Cut Off

Cut off power supply by pressing the button on the rotating plug and pulling it out.

Power Connection

Power Supply Verification

Verify power supply equipment before connection; ensure earth wire is grounded.

DMX-512 Connection

DMX Cable & Termination

Use shielded cable, XLR plugs, and terminate the last fixture with a resistor.

Description of the Device

Display Control

Error Code List & Troubleshooting

Error Code Descriptions

Lists various error codes related to SPI, program, bus, and fan errors.

Check Measurements for Errors

Details the checks required for each error, such as welding, signal, or sensor checks.

Menu Maps

DMX Protocol

DMX Channels and Functions

Maps DMX channels to functions like Pan, Tilt, Fade Type, and DMX Values.

Power;Special Functions

DMX control for blackout, prism movement, parking position, and resets.

Rotating Gobo Wheel Control

DMX channels for selecting rotating gobos, indexing, and rotation modes.

Gobo Indexing & Rotation

DMX control for rotating gobo indexing and rotation on specific channels.

Pattern Selection & Rotation

DMX channels for selecting patterns, rotation, and dynamic patterns.

Pattern Rotation & Indexing

DMX control for pattern rotation, indexing, and blocking.

Beam Shaper Rotation & Indexing

DMX control for beam shaper indexing and rotation modes.

Maintenance and Cleaning

Electric Equipment Specification

Jolly X-7 Coupe Specifications

General IconGeneral
BrandJolly
ModelX-7 Coupe
CategoryDJ Equipment
LanguageEnglish

Related product manuals