INSTALLATION
Insert Micro SD Card
● Use the edge of a small coin ( or similar object ) to push the memory
card into slot if required. Take care that the card has clicked into slot, a
second push inwards will release the memory card.
● Do not remove or insert the memory card when the Mirror Dash Cam
is turned on. This may damage the memory card.
● Take care when removing the SD card from the Mirror Dash Cam
when it is installed in the vehicle. Due to the card slot mechanism, the
card will spring from the slot when released.
● Periodically reformat the memory card. Every 2-3 weeks we
recommend that you reformat the memory card. This will wipe any files
from the card and set it up afresh for continued use with your Mirror
Dash Cam.
● Of course, you should only do this after you've downloaded any files
from the SD card that you may want to keep, as formatting the card will
remove all content.
● Format your memory card using the Mirror Dash Cam. This will make
sure that the card is structured specifically for your camera.
● Press to enter into the setting and choose the Format Card option
to follow the on-screen instructions accordingly.
Notice:
1 2 3
4
5 6 7 8
9 10 11 12 13
14 15 16 17
18 19 20 21
To Next Page
Loading...
