JONATHAN Y JYL1010A - User Manual

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE

QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X

G Finial 1X

D Socket 1X

H Bulb 1X

Model# JYL1010A

Product Dimensions: 14"Lx 14"W x 27"H

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

Need help?

Do you have a question about the JONATHAN Y JYL1010A and is the answer not in the manual?

Summary

Warning and Safety Information

General Warnings

Inspect item for damage before installation. Do not install if damaged.

Care and Maintenance

Unplug lamps before cleaning. Use appropriate methods for materials. Avoid chemicals.

Important Safety Instructions

Verify all parts, assemble on a soft surface, follow safety guidelines for use and installation.

Product Assembly

Preparation

Ensure all parts are present before assembly. Check package contents.

Bulb Type Recommendation

Use specified bulb types: Type 'A' max 100W, CFL max 23W, or LED max 12W.

Step 1: Base and Neck Assembly

Connect and screw the Neck (B) to the Base (A), ensuring the power cord is not twisted.

Step 2: Harp, Shade, and Bulb Installation

Insert Harp (E) into Saddle (C), attach Shade (F), tighten Finial (G), and insert bulb (H).

Step 3: Stability Check

Place the assembled lamp on a level surface and check for stability.

Summary

Warning and Safety Information

General Warnings

Inspect item for damage before installation. Do not install if damaged.

Care and Maintenance

Unplug lamps before cleaning. Use appropriate methods for materials. Avoid chemicals.

Important Safety Instructions

Verify all parts, assemble on a soft surface, follow safety guidelines for use and installation.

Product Assembly

Preparation

Ensure all parts are present before assembly. Check package contents.

Bulb Type Recommendation

Use specified bulb types: Type 'A' max 100W, CFL max 23W, or LED max 12W.

Step 1: Base and Neck Assembly

Connect and screw the Neck (B) to the Base (A), ensuring the power cord is not twisted.

Step 2: Harp, Shade, and Bulb Installation

Insert Harp (E) into Saddle (C), attach Shade (F), tighten Finial (G), and insert bulb (H).

Step 3: Stability Check

Place the assembled lamp on a level surface and check for stability.

This document provides comprehensive instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL1010A lamp. It includes a warning about inspecting the item upon receipt, care and maintenance guidelines, important safety instructions, a detailed part list and hardware list, and step-by-step assembly instructions.

Function Description:

The JONATHAN Y Model# JYL1010A is a portable lamp designed to provide illumination. It features a base, neck, saddle, socket, harp, shade, finial, and a bulb. The lamp is designed for indoor use and is equipped with a polarized plug as a safety feature to reduce the risk of electric shock. The assembly process involves connecting the neck to the base, inserting the harp into the saddle, placing the shade on the harp, securing it with the finial, and finally inserting the bulb into the socket. Once assembled, the lamp can be placed on a level surface and used to provide light.

Important Technical Specifications:

Model Number: JYL1010A
Product Dimensions: 14"L x 14"W x 27"H
Bulb Type Compatibility:
- ON/OFF Type "A" Bulb: Maximum 100-watt
- CFL Bulb: Maximum 23-watt
- LED Bulb: Maximum 12-watt
Included Bulb: LED 9-watt bulb
Plug Type: Polarized plug (one blade wider than the other) for safety.
Estimated Assembly Time: 6 minutes.

Part List and Hardware List:

The lamp consists of the following components:

A: Lamp base (Quantity: 1)
B: Neck (Quantity: 1)
C: Saddle (Quantity: 1)
D: Socket (Quantity: 1)
E: Harp (Quantity: 1)
F: Shade (Quantity: 1)
G: Finial (Quantity: 1)
H: Bulb (Quantity: 1)

Usage Features:

Assembly: The lamp is designed for straightforward assembly. Users are instructed to pull the power cord to connect the neck (B) to the base (A), then screw the neck (B) onto the lamp base (A), being careful not to twist the power cord and tightening securely. Next, the harp (E) is inserted into the saddle (C), the shade (F) is placed on the harp (E), and the finial (G) is tightened onto the harp (E). Finally, the bulb (H) is inserted into the socket (D). After assembly, the lamp should be placed on a level surface to ensure stability.
Bulb Compatibility: The lamp is versatile in its bulb compatibility, supporting various types and wattages, including incandescent (Type "A"), CFL, and LED bulbs. An LED 9-watt bulb is included with the product.
Polarized Plug: A key safety feature is the polarized plug, which helps reduce the risk of electric shock. Users are advised that the plug will fit into a polarized outlet only one way. If it doesn't fit fully, they should reverse the plug. If it still doesn't fit, a qualified electrician should be contacted. The manual explicitly warns against using an extension cord unless the plug can be fully inserted and against attempting to disregard this safety feature.
Cord Management: During assembly, users are cautioned to be careful not to twist the power cord while screwing the neck onto the lamp base and to tighten securely. The external flexible cable or cord of this lamp cannot be replaced; if the cord is damaged, the lamp must be destroyed.

Maintenance Features:

Cleaning: To maintain the lamp, users should unplug it before using any cleaning solutions. Shades can be dusted with a feather duster or an appropriate vacuum-brush attachment. The lamp bases should be wiped with a soft, dry cloth and cleaned using methods appropriate for the material.
Chemical Avoidance: It is crucial to avoid the use of chemicals and household cleaners, as they may damage the finish of the lamp.
Pre-Assembly Inspection: Before assembly, users are instructed to inspect the item carefully for any damage or obvious defects. If any part is missing or damaged, they should not attempt to assemble the product. The warning explicitly states that the item may not be returned once it has been installed, emphasizing the importance of pre-assembly inspection.
Soft Surface Assembly: To prevent scratching the finish during assembly, the item should be assembled on a soft surface.

Safety Instructions:

Part Verification: Ensure all parts are present before beginning assembly.
Damage Protocol: Do not assemble if any part is missing or damaged.
Fire/Shock/Injury Prevention: Follow all guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury.
Cord Integrity: The external flexible cable or cord is not replaceable. A damaged cord necessitates the destruction of the lamp.
Polarized Plug Adherence: Always use the polarized plug correctly and do not force it. Consult an electrician if the plug does not fit properly. Avoid using extension cords unless the plug can be fully inserted. Do not attempt to bypass this safety feature.