JONATHAN Y JYL1083A User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL1083A
Product Dimensions: 15"Lx 15"W x 61"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B Lamp body 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X

JONATHAN Y JYL1083A Specifications

General

Brand	JONATHAN Y
Model	JYL1083A
Category	Home Lighting
Language	English

Summary

Care and Maintenance

Cleaning Procedures

Unplug lamps before cleaning. Dust shades with a feather duster or vacuum attachment. Wipe bases with a soft, dry cloth.

Important Safety Instructions

General Safety and Assembly

Ensure all parts are present, assemble on a soft surface, and follow guidelines for safe use and installation.

Cord and Plug Safety

The external flexible cord is not replaceable. Use polarized plug only in polarized outlets; do not use extension cords.

Part List and Hardware List

Preparation and Assembly Steps

Pre-Assembly Checks

Before assembly, ensure all parts are present and compare with package contents. Check bulb wattage limits.

Assembly Step 1

Align parts, screw saddle and socket onto lamp body, then connect lamp body sections and base.

Assembly Step 2

Insert harp into saddle, place shade on harp, tighten finial, and screw bulb into socket.

Assembly Step 3

Place the lamp on a level surface to check for stability.