JONATHAN Y JYL1058A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
CARE AND MAINTENANCE
Model# JYL1058A
Product Dimensions: 14"Lx 14"W x 26.5"H
WARNING
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.

JONATHAN Y JYL1058A Specifications

General

Color	Black
Material	Metal
Shade Material	Metal
Base Material	Metal
Bulb Included	No
Number of Lights	1
Voltage	120V
Type	Pendant Light
Wattage	40 W
Height	19.7 inches
Width	15.7 inches

Summary

General Safety and Warnings

Installation Warning

Inspect item for damage or defects before installation. Do not install if damaged. Item cannot be returned once installed.

Important Safety Instructions

Ensure all parts are present, assemble on a soft surface, and follow safety guidelines for use.

Electrical Safety Features

Portable lamp has a polarized plug to reduce electric shock risk. Do not use with extension cords unless plug fits fully.

Care and Maintenance

Cleaning Guidelines

Unplug before cleaning. Dust shades with a feather duster or vacuum brush. Wipe bases with a soft, dry cloth. Avoid chemicals.

Part List and Hardware

Assembly and Preparation

Preparation Steps

Before assembly, check all parts against package contents. Estimated assembly time is 6 minutes.

Bulb Usage Information

Use Type 'A' bulb max 100W, CFL max 23W, or LED max 12W. A 9W LED bulb is included.

Assembly Step 1

Connect the Neck (B) to the Base (A) and screw securely, being careful not to twist the power cord.

Assembly Step 2

Insert Harp (E) into Saddle (C), place Shade (F) on Harp, tighten Finial (G) onto Harp, and insert Bulb (H) into Socket (D).

Assembly Step 3

Place the lamp on a level surface to check for stability.