JONATHAN Y JYL1054A User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
Model# JYL1054A
Product Dimensions: 14"Lx 14"W x 26.5"H
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material Avoid the use of chemicals and household cleaners as they may damage the finish
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
*
To reduce the risk of fire electrical shock or injury to persons or property please follow the guideline below
the
material
.
Avoid
the
use
of
chemicals
and
household
cleaners
as
they
may
damage
the
finish
.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
*
T
o re
d
uce
th
e r
i
s
k
o
f
fi
re, e
l
ec
t
r
i
ca
l
s
h
oc
k
or
i
n
j
ury
t
o persons or proper
t
y, p
l
ease
f
o
ll
ow
th
e gu
id
e
li
ne
b
e
l
ow
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C
Saddle
1X
G
Finial
1X
C
S
a
ddl
e
1X
G
Fi
n
i
a
l
1X
D Socket 1X H Bulb 1X

JONATHAN Y JYL1054A Specifications

General

Brand	JONATHAN Y
Model	JYL1054A
Category	Home Lighting
Language	English

Summary

General Safety Warnings

Electrical Installation Requirements

Requires installation by a licensed electrician and switching off the main electrical supply before starting.

Pre-Installation Inspection

Inspect the item carefully for damage or defects before installation. Do not install if damaged.

Care and Maintenance Instructions

Cleaning Procedures

Unplug lamps before cleaning. Use feather duster for shades and soft cloth for bases. Avoid chemicals.

Important Safety and Assembly Guidelines

Assembly Precautions

Ensure all parts are present. Assemble on a soft surface to prevent scratches. Follow guidelines for safe use.

Cord and Plug Safety

The flexible cord cannot be replaced. Use the polarized plug correctly; do not defeat the safety feature.

Part List and Hardware List

Product Preparation and Assembly

Bulb Usage Guidelines

Use specified bulb types and wattages: MAX 100W incandescent, MAX 23W CFL, or MAX 12W LED.

Step 1: Connect Neck to Base

Pull power cord, screw Neck onto Lamp Base securely, avoiding cord twisting.

Step 2: Assemble Shade and Install Bulb

Insert Harp, attach Shade, tighten Finial, and screw Bulb into socket.

Step 3: Final Placement Check

Place the light on a level surface and check for stability.