JONATHAN Y JYL1004A - User Manual

To Next Page

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR

1/2

Model# JYL1004A

Product Dimensions: 14"Lx 14"W x 22.5"H

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wi

e with a soft

cloth and clean lam

bases with the methods a

riate to

INSPECT

ITEM

CAREFULLY

BEFORE

ATTEMPTING

INSTALL

THERE

ANY

DAMAGE

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

This item should be assembled on a soft surface to prevent scratching the finish during assembly

vacuum brush

attachment.

Wipe

with

soft,

dry

cloth

and

clean

lamp

bases

with

the

methods

appropriate

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

This

item

should

assembled

soft

surface

prevent

scratching

the

finish

during

assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

PIECE DESCRIPTION PICTURE QUANTIT

Part List and Hardware List

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

Skt

Blb

D Socket 1X H Bulb 1X

1/2

Need help?

Do you have a question about the JONATHAN Y JYL1004A and is the answer not in the manual?

Summary

Safety and Installation Warnings

Electrical Installation Recommendation

Recommends installation by a licensed electrician and switching off main electrical supply before installation.

Item Inspection and Handling

Inspect the item carefully for any damage or obvious defect before attempting installation.

Important Safety Instructions

Ensure all parts are present, assemble on a soft surface, and follow guidelines to reduce risk of shock or injury.

Cord and Plug Safety

The flexible cable cannot be replaced; if damaged, the luminaire must be destroyed. Use polarized plug correctly.

Care and Maintenance

Cleaning Procedures

Unplug lamps before cleaning. Dust shades with a feather duster or vacuum brush. Wipe bases with a soft, dry cloth.

Chemical Avoidance

Avoid the use of chemicals and household cleaners as they may damage the finish of the lamp.

Preparation and Assembly

Pre-Assembly Checks

Ensure all parts are present by comparing with package and hardware lists before assembly.

Assembly Steps

Follow step-by-step instructions for connecting parts, attaching the shade, and inserting the bulb.

Bulb Type Recommendation

Use 'A' type bulbs: MAX 100-WATT incandescent, MAX 23-WATT CFL, or MAX 12-WATT LED.

Summary

Safety and Installation Warnings

Electrical Installation Recommendation

Recommends installation by a licensed electrician and switching off main electrical supply before installation.

Item Inspection and Handling

Inspect the item carefully for any damage or obvious defect before attempting installation.

Important Safety Instructions

Ensure all parts are present, assemble on a soft surface, and follow guidelines to reduce risk of shock or injury.

Cord and Plug Safety

The flexible cable cannot be replaced; if damaged, the luminaire must be destroyed. Use polarized plug correctly.

Care and Maintenance

Cleaning Procedures

Unplug lamps before cleaning. Dust shades with a feather duster or vacuum brush. Wipe bases with a soft, dry cloth.

Chemical Avoidance

Avoid the use of chemicals and household cleaners as they may damage the finish of the lamp.

Preparation and Assembly

Pre-Assembly Checks

Ensure all parts are present by comparing with package and hardware lists before assembly.

Assembly Steps

Follow step-by-step instructions for connecting parts, attaching the shade, and inserting the bulb.

Bulb Type Recommendation

Use 'A' type bulbs: MAX 100-WATT incandescent, MAX 23-WATT CFL, or MAX 12-WATT LED.

The JONATHAN Y Model# JYL1004A is a portable lighting fixture designed for indoor use, featuring a classic design with a glass lamp base and a fabric shade. It is intended to provide ambient lighting and enhance the aesthetic of a room.

Function Description:

The primary function of this device is to illuminate a space. It operates by converting electrical energy into light through a bulb inserted into its socket. The lamp is designed for easy assembly and operation, providing a stable light source once set up. Its polarized plug serves as a safety feature, ensuring correct electrical connection and reducing the risk of electric shock. The on/off switch (implied by the "ON/OFF TYPE 'A' BULB" specification) allows for simple control of the light.

Important Technical Specifications:

Model Number: JYL1004A
Product Dimensions: 14"L x 14"W x 22.5"H (Length, Width, Height)
Bulb Type Compatibility:
- ON/OFF Type "A" Bulb: Maximum 100-Watt
- CFL Bulb: Maximum 23-Watt
- LED Bulb: Maximum 12-Watt
Included Bulb: A 9-Watt LED bulb is included in the box.
Electrical Safety: Features a polarized plug (one blade wider than the other) to reduce the risk of electric shock.
Power Cord: External flexible cable or cord; if damaged, the luminaire must be destroyed as the cord cannot be replaced.
Installation: Recommended to be installed by a licensed electrician. Requires switching off the main electrical supply from the fuse box/circuit breaker before installation.

Usage Features:

Assembly: Designed for straightforward assembly, estimated to take 6 minutes. All parts should be present and undamaged before starting. Assembly should be done on a soft surface to prevent scratching.
Bulb Installation: The lamp accommodates various bulb types within specified wattage limits, offering flexibility in light output and energy consumption. A 9-watt LED bulb is provided for immediate use.
Stability: Once assembled, the lamp should be placed on a level surface to ensure stability.
Safety Instructions:
- Always ensure the main electrical supply is off before installation.
- Inspect the item carefully for damage or defects before installation; damaged items cannot be returned once installed.
- Follow guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury.
- The polarized plug must be fully inserted into a polarized outlet. If it doesn't fit, reverse the plug. If it still doesn't fit, contact a qualified electrician.
- Do not use with an extension cord unless the plug can be fully inserted into it.
- Do not attempt to defeat the safety feature of the polarized plug.

Maintenance Features:

Cleaning:
- Always unplug the lamp before using any cleaning solutions.
- Dust shades with a feather duster or a vacuum-brush attachment.
- Wipe lamp bases with a soft, dry cloth.
- Use cleaning methods appropriate to the material of the lamp base.
- Avoid using chemicals and household cleaners, as they may damage the finish.
Cord Damage: If the external flexible cable or cord is damaged, the entire luminaire must be destroyed as the cord is not replaceable. This emphasizes a safety-first approach to maintenance.
Durability: The warning against returning the item once installed suggests that the product is expected to be free of defects upon initial inspection and is designed for long-term use if properly handled and maintained.