JONATHAN Y JYL1000A User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
CARE AND MAINTENANCE
Model# JYL1000A
Product Dimensions: 11.25"Lx 7"W x
20.5"H
CARE
AND
MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
A Lamp base 1X C Socket 1X
B Shade 1X D Bulb 1X

JONATHAN Y JYL1000A Specifications

General

Brand	JONATHAN Y
Model	JYL1000A
Category	Home Lighting
Language	English

Summary

Warning and Safety Precautions

Inspection and Installation Warning

Inspect item carefully before installation. Do not install if damaged or defective. Item cannot be returned once installed.

Care and Maintenance Guidelines

Unplug lamps before cleaning. Dust shades with feather duster or vacuum. Wipe bases with soft dry cloth. Avoid chemicals.

Important Safety Instructions

Ensure all parts are present. Assemble on a soft surface. Follow guidelines to reduce risk of fire, shock, or injury. Cord is not replaceable.

Product Preparation and Assembly

Preparation and Parts Check

Verify all parts are present before assembly. Do not assemble if parts are missing or damaged. Estimated assembly time: 6 minutes.

Recommended Bulb Usage

Use ON/OFF Type 'B' bulb max 40W, CFL max 13W, or LED max 9W. A 4W LED bulb is included.