JONATHAN Y JYL1095A - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Model# JYL1095A

Product Dimensions: 12.25"Lx 10"W x 60"H

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an

extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X C Socket 1X

B Lamp body 1X D Bulb 1X

Need help?

Do you have a question about the JONATHAN Y JYL1095A and is the answer not in the manual?

Summary

Product Preparation and Assembly

Step 1: Align Parts and Assemble Body

Align parts, screw socket onto lamp body, then connect lamp body sections and base.

Step 2: Insert Bulb

Insert the bulb into the socket to complete the lighting fixture assembly.

Step 3: Check Stability

Place the assembled lamp on a level surface to verify its stability.

Summary

Product Preparation and Assembly

Step 1: Align Parts and Assemble Body

Align parts, screw socket onto lamp body, then connect lamp body sections and base.

Step 2: Insert Bulb

Insert the bulb into the socket to complete the lighting fixture assembly.

Step 3: Check Stability

Place the assembled lamp on a level surface to verify its stability.

This document provides instructions for the assembly, use, and maintenance of the JYL1095A floor lamp.

Function Description:

The JYL1095A is a portable floor lamp designed to provide illumination. It features a polarized plug as a safety feature to reduce the risk of electric shock, ensuring that the plug fits into a polarized outlet only one way. The lamp is designed for indoor use and requires a specific type and wattage of bulb for optimal and safe operation.

Important Technical Specifications:

Model Number: JYL1095A
Product Dimensions: 12.25"L x 10"W x 60"H
Bulb Type:
- ON/OFF Type "A" Bulb: Maximum 60-watt
- CFL Bulb: Maximum 13-watt
- LED Bulb: Maximum 9-watt
Included Bulb: LED 4-watt bulb
Plug Type: Polarized plug (one blade wider than the other)
Assembly Time: Estimated 6 minutes

Usage Features:

Assembly: The lamp requires assembly, which involves screwing together the lamp body sections (B1, B2, B3), attaching the socket (C) to the top lamp body section (B3), and then screwing the assembled lamp body onto the lamp base (A). The bulb (D) is then inserted into the socket (C). It is crucial to ensure all parts are aligned before assembly and to avoid over-tightening or twisting the power cord. Assembly should be performed on a soft surface to prevent scratching the finish.
Bulb Installation: The lamp is designed to be used with specific bulb types and wattages. The included bulb is a 4-watt LED. When replacing bulbs, users must adhere to the specified maximum wattages for incandescent (60W), CFL (13W), or LED (9W) bulbs to prevent overheating and potential hazards.
Safety Features:
- Polarized Plug: The lamp is equipped with a polarized plug, meaning one blade is wider than the other. This plug is designed to fit into a polarized outlet in only one orientation. If the plug does not fit fully, it should be reversed. If it still does not fit, a qualified electrician should be contacted. Users are warned against forcing the plug or attempting to bypass this safety feature.
- Extension Cords: If an extension cord is necessary, it must be one that allows the polarized plug to be fully inserted.
- Damaged Cord: The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp must be destroyed to prevent electrical hazards.
Stability Check: After assembly, the lamp should be placed on a level surface to ensure it is stable before use.

Maintenance Features:

Cleaning:
- Shades: Dust shades with a feather duster or an appropriate vacuum-brush attachment.
- Lamp Bases: Wipe lamp bases with a soft, dry cloth. The cleaning method for the base should be appropriate to its material.
- General Cleaning: Unplug the lamp before using any cleaning solutions.
Chemical Avoidance: Avoid the use of chemicals and household cleaners, as they may damage the finish of the lamp.
Pre-Installation Inspection: Before attempting to install, users must carefully inspect the item for any damage or obvious defects. If any damage or defect is found, the item should not be installed. Once installed, the item may not be returned. This emphasizes the importance of a thorough inspection prior to assembly.
Part Verification: Before beginning assembly, users should ensure all parts indicated in the part list and hardware list are present. If any part is missing or damaged, assembly should not be attempted.