To Next PageTo Next Page
Need help?Do you have a question about the JONATHAN Y JYL1065A and is the answer not in the manual?
Proper methods for dusting shades and cleaning lamp bases without damage.
Guidelines for safe assembly, handling, cord safety, polarized plug usage, and electrical shock prevention.
Detailed steps for lamp assembly, including connecting parts and recommended bulb types and wattages.
Proper methods for dusting shades and cleaning lamp bases without damage.
Guidelines for safe assembly, handling, cord safety, polarized plug usage, and electrical shock prevention.
Detailed steps for lamp assembly, including connecting parts and recommended bulb types and wattages.
This document outlines the assembly, care, and safety instructions for a portable lamp, Model# JYL1065A, designed for indoor use. The lamp's primary function is to provide illumination, and it features a design that requires user assembly before operation.
The lamp is designed for ease of use and assembly, with a clear, step-by-step guide provided to ensure proper setup. Users are instructed to first connect the neck (B) to the lamp base (A) by pulling the power cord through and then screwing the neck securely onto the base. Care must be taken during this step to avoid twisting the power cord, which could damage it or impair the lamp's function. Following this, the harp (E) is inserted into the saddle (C), which is typically located at the top of the neck assembly. The shade (F) is then placed onto the harp, and the finial (G) is tightened onto the harp to secure the shade in place. Finally, the bulb (H) is inserted into the socket (D). Once assembled, the lamp should be placed on a level surface to ensure stability before use.
A key usage feature of this lamp is its compatibility with various bulb types. It is designed to use an ON/OFF type "A" bulb with a maximum wattage of 100 watts. Alternatively, users can opt for a CFL bulb with a maximum of 23 watts or an LED bulb with a maximum of 12 watts. The lamp includes a 9-watt LED bulb in the box, providing an energy-efficient lighting solution right out of the package. This flexibility in bulb choice allows users to customize the light output and energy consumption according to their preferences.
Safety is a paramount consideration in the design and instructions for this lamp. It incorporates a polarized plug, a crucial safety feature to reduce the risk of electric shock. This plug has one blade wider than the other, ensuring it fits into a polarized outlet in only one orientation. If the plug does not fit fully into the outlet, users are advised to reverse the plug. If it still does not fit, a qualified electrician should be contacted. The instructions explicitly warn against forcing the plug into an outlet or using it with an extension cord unless the extension cord's receptacle can fully accommodate the polarized plug. Users are also cautioned against attempting to bypass or disregard this safety feature. Furthermore, the instructions emphasize the importance of inspecting the item carefully for any damage or obvious defects before attempting to install it. If any damage is found, the item should not be installed, as it may not be returnable once installed. This highlights a commitment to user safety and product integrity.
Maintenance of the lamp is straightforward and designed to preserve its appearance and functionality. For cleaning, users are advised to unplug the lamp before using any cleaning solutions. The lamp shades can be dusted with a feather duster or a vacuum-brush attachment, which helps remove accumulated dust without damaging the shade material. The lamp bases should be wiped with a soft, dry cloth, and cleaned using methods appropriate for the specific material of the base. A critical maintenance warning is to avoid the use of chemicals and household cleaners, as these can potentially damage the finish of the lamp, leading to discoloration or material degradation. Regular, gentle cleaning as instructed will help maintain the lamp's aesthetic appeal and extend its lifespan.
The assembly process is estimated to take approximately 6 minutes, indicating a quick and user-friendly setup. To prevent scratching the finish during assembly, it is recommended to assemble the item on a soft surface. The instructions also stress the importance of ensuring all parts are present before beginning assembly. If any part is missing or damaged, users are advised not to attempt assembly and to refer to the included part list and hardware list for verification.
In summary, this portable lamp is a functional and aesthetically pleasing lighting solution designed for easy assembly and safe operation. Its features include flexible bulb compatibility, a crucial polarized plug for electrical safety, and simple maintenance guidelines to ensure longevity and appearance. The comprehensive instructions aim to guide users through a smooth setup process while prioritizing their safety and the product's durability.
General| Brand | JONATHAN Y |
|---|---|
| Model | JYL1065A |
| Style | Modern |
| Material | Metal |
| Shade Material | Fabric |
| Bulb Type | LED |
| Bulb Included | Yes |
| Bulb Base | E26 |
| Wattage | 9 watts |
