JONATHAN Y JYL1063A - User Manual

To Next Page

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED

ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION

Model# JYL1063A

Product Dimensions: 14"Lx 14"W x 23 5"H

BREAKER

BEFORE

INSTALLATION

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an

mens

ons:

14"L

14"W

5"H

appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate

to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that

ou have all

arts indicated before

ou be

in assembl

of this item

Please

make

sure

that

you

have

all

parts

indicated

before

you

begin

assembly

this

item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline

below for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the

can be full

inserted. do not attem

t to defeat this safet

feature.

the

cord

damaged

the

luminaire

shall

destroyed

PIECE DESCRIPTION PICTURE QUANTIT

cord

unless

the

plug

can

fully

inserted.

not

attempt

defeat

this

safety

feature.

Part List and Hardware List

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

Socket

Blb

Need help?

Do you have a question about the JONATHAN Y JYL1063A and is the answer not in the manual?

Summary

Preparation and Assembly

Assembly Step 1

Connect the neck to the lamp base and tighten securely.

Assembly Step 2

Insert harp, attach shade with finial, and screw in the bulb.

Assembly Step 3

Place the lamp on a level surface to check stability.

This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL1063A portable lamp.

Function Description:

The JYL1063A is a portable lamp designed to provide illumination. It features a polarized plug as a safety feature to reduce the risk of electric shock. The lamp is intended for indoor use and requires a specific type and wattage of bulb for optimal and safe operation.

Important Technical Specifications:

Model Number: JYL1063A
Product Dimensions: 14"L x 14"W x 23.5"H
Bulb Type (Recommended): ON/OFF Type "A"
Maximum Incandescent Bulb Wattage: 100-watt
Maximum CFL Bulb Wattage: 23-watt
Maximum LED Bulb Wattage: 12-watt
Included Bulb: LED 9-watt bulb
Plug Type: Polarized plug (one blade wider than the other)
Power Source: Standard electrical outlet

Usage Features:

Assembly: The lamp requires simple assembly, estimated to take 6 minutes. Users are instructed to ensure all parts are present and undamaged before starting. Assembly should be performed on a soft surface to prevent scratching.
- Step 1: Connect the Neck (B) to the Lamp base (A) by pulling the power cord through and screwing the neck onto the base. Care must be taken not to twist the power cord.
- Step 2: Insert the Harp (E) into the Saddle (C). Place the Shade (F) onto the Harp (E). Tighten the Finial (G) into the Harp (E). Insert the Bulb (H) into the Socket (D).
- Step 3: Place the assembled lamp on a level surface to check for stability.
Bulb Requirements: It is crucial to use the specified bulb types and wattages to prevent fire, electrical shock, or damage. The lamp is designed for ON/OFF Type "A" bulbs, with a maximum of 100-watt for incandescent, 23-watt for CFL, or 12-watt for LED. A 9-watt LED bulb is included in the box.
Safety Instructions:
- Installation should be performed by a licensed electrician if professional wiring is involved, though this is a portable lamp.
- Always switch off the main electrical supply from the main fuse box/circuit breaker before installation or maintenance.
- Inspect the item carefully for any damage or defects before attempting to install. Do not install if damaged, as returns may not be accepted once installed.
- The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.
- The polarized plug is a safety feature. It will only fit into a polarized outlet one way. If it doesn't fit fully, reverse the plug. If it still doesn't fit, contact a qualified electrician. Do not attempt to defeat this safety feature or use it with an extension cord unless the plug can be fully inserted into the extension cord.
- Ensure all parts are indicated and present before assembly.
- Assemble on a soft surface to prevent scratching.
- Follow guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury.

Maintenance Features:

Cleaning Lampshades: Dust shades with a feather duster or an appropriate vacuum-brush attachment.
Cleaning Lamp Bases: Wipe lamp bases with a soft, dry cloth. Clean according to the material of the base.
Chemical Avoidance: Avoid the use of chemicals and household cleaners, as they may damage the finish of the lamp.
Power Disconnection: Always unplug lamps before using any cleaning solutions.