JONATHAN Y JYL1077A - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

Model# JYL1077A

Product Dimensions: 13"Lx 13"W x 25.5"H

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

for

safe

use

and

installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

gyygy

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTIT

A.B.C Lamp base 1X E Shade 1X

B Saddle 1X F Finial 1X

Socket

Bulb

D Harp 1X

Need help?

Do you have a question about the JONATHAN Y JYL1077A and is the answer not in the manual?

Summary

Warning

Installation Inspection

Inspect item carefully for damage or defects before installation. Do not install if damaged.

Care and Maintenance

Cleaning Guidelines

Unplug before cleaning. Dust shades with feather duster or vacuum attachment. Wipe bases with a soft, dry cloth.

Important Safety Instructions

Pre-Assembly and Cord Safety

Verify all parts, assemble on a soft surface. Do not replace damaged cord. Use polarized plug correctly.

Preparation and Assembly Steps

Part Verification and Bulb Choice

Confirm all parts are present before assembly. Use recommended bulb types and wattages.

Assembly Procedure

Step-by-step instructions for attaching harp, shade, finial, and bulb, followed by a stability check.

Summary

Warning

Installation Inspection

Inspect item carefully for damage or defects before installation. Do not install if damaged.

Care and Maintenance

Cleaning Guidelines

Unplug before cleaning. Dust shades with feather duster or vacuum attachment. Wipe bases with a soft, dry cloth.

Important Safety Instructions

Pre-Assembly and Cord Safety

Verify all parts, assemble on a soft surface. Do not replace damaged cord. Use polarized plug correctly.

Preparation and Assembly Steps

Part Verification and Bulb Choice

Confirm all parts are present before assembly. Use recommended bulb types and wattages.

Assembly Procedure

Step-by-step instructions for attaching harp, shade, finial, and bulb, followed by a stability check.

This document describes the JONATHAN Y Model# JYL1077A table lamp, providing assembly instructions, safety guidelines, and care information.

Function Description:

The JYL1077A is a portable table lamp designed to provide illumination. It features a traditional design with a decorative base, a fabric shade, and a standard bulb socket. The lamp is equipped with a polarized plug as a safety feature to reduce the risk of electric shock.

Important Technical Specifications:

Model Number: JYL1077A
Product Dimensions: 13"L x 13"W x 25.5"H
Bulb Type: The lamp is designed to use an ON/OFF Type "A" bulb.
Maximum Wattage (Incandescent): 60-watt
Maximum Wattage (CFL): 13-watt
Maximum Wattage (LED): 9-watt
Included Bulb: The lamp comes with a 9-watt LED bulb.
Plug Type: Polarized plug (one blade wider than the other).

Usage Features:

Assembly: The lamp requires minimal assembly, primarily involving attaching the harp, shade, finial, and inserting the bulb. The estimated assembly time is 6 minutes.
Bulb Installation: The bulb (G) is screwed into the socket (C).
Shade Attachment: The shade (E) rests on the harp (D) and is secured by the finial (F).
Stability Check: After assembly, the lamp should be placed on a level surface to ensure stability.
Polarized Plug: The polarized plug is a safety feature. It will only fit into a polarized outlet one way. If it doesn't fit, the plug should be reversed. If it still doesn't fit, a qualified electrician should be contacted. The lamp should not be used with an extension cord unless the plug can be fully inserted. This safety feature should not be disregarded.

Maintenance Features:

Cleaning Lamps: Lamps should be unplugged before using any cleaning solutions.
Cleaning Shades: Shades can be dusted with a feather duster or an appropriate vacuum-brush attachment.
Cleaning Lamp Bases: Lamp bases should be wiped with a soft, dry cloth. The cleaning methods should be appropriate for the material of the base.
Avoid Harsh Cleaners: The use of chemicals and household cleaners should be avoided as they may damage the finish of the lamp.
Cord Replacement: The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp must be destroyed.

Safety Instructions and Warnings:

Pre-Installation Inspection: Inspect the item carefully before attempting to install. Do not install if there is any damage or obvious defect. Once installed, the item may not be returned.
Part Verification: Ensure all parts indicated in the part list are present before beginning assembly.
Assembly Surface: Assemble the item on a soft surface to prevent scratching the finish.
Fire/Shock/Injury Prevention: Follow the provided guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury to persons or property.
Damaged Cord: If the cord is damaged, the lamp shall be destroyed as the cord cannot be replaced.
Polarized Plug Safety: Do not force the polarized plug into an outlet. If it doesn't fit after reversing, consult a qualified electrician. Do not use with extension cords unless the plug fully inserts. Do not attempt to bypass this safety feature.