JONATHAN Y JYL1075A - User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
Model# JYL1075A
Product Dimensions: 13"Lx13 "W x26 "H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Summary

General Warning

Care and Maintenance

Important Safety Instructions

Polarized Plug Safety

Details the polarized plug's safety feature to reduce electric shock risk and proper insertion.

Part List and Hardware

Assembly Preparation

Assembly Steps

Step 1: Connect Neck to Base

Instructions for connecting the lamp neck to the base, ensuring the power cord is not twisted.

Step 2: Assemble Harp, Shade, and Bulb

Guide for attaching the harp, shade, finial, and inserting the bulb.

Step 3: Stability Check

Procedure to place the lamp on a level surface and check its stability.

JONATHAN Y JYL1075A Specifications

General

Type	Table Lamp
Shade Color	White
Number of Lights	1
Bulb Type	LED
Bulb Base	E26
Voltage	120V
Product Name	JONATHAN Y JYL1075A
Finish	Silver
Shade Material	Fabric
Max Wattage	60W
Width	14 inches
Length	14 in
Power Source	Corded Electric