JONATHAN Y JYL1073A User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL1073A
Product Dimensions: 14"Lx 14"W x 26"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D Harp 1X

JONATHAN Y JYL1073A Specifications

General

Product Type	Table Lamp
Brand	JONATHAN Y
Model Number	JYL1073A
Style	Contemporary
Shade Color	White
Bulb Type	LED
Bulb Wattage	9W
Bulb Included	Yes
Switch Type	On/Off

Summary

Warning

Inspection Before Installation

Inspect the item carefully for damage or defects before installation. Do not install if damaged.

Care and Maintenance

Cleaning Procedures

Unplug before cleaning. Dust shades with a feather duster. Wipe bases with a soft, dry cloth.

Important Safety Instructions

Preparation and Surface Safety

Verify all parts before assembly. Assemble on a soft surface to prevent scratching.

Electrical Safety Guidelines

Follow guidelines to reduce risk of shock or injury. Do not replace cord; it's not repairable.

Polarized Plug Usage

Use polarized plug correctly in compatible outlets; do not force or use extension cords.

Part List

Assembly Instructions

Preparation and Bulb Type

Check parts against list. Use specified bulb types (max 100W incandescent, 23W CFL, or 12W LED).

Step 1: Lamp Assembly

Insert Harp into Saddle, attach Shade to Harp, tighten Finial, and screw in Bulb.

Step 2: Stability Check

Place the assembled lamp on a level surface to ensure it is stable.