JONATHAN Y JYL2040A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
Model# JYL2040A
Product Dimensions: 13"Lx 13"W x 24"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y JYL2040A Specifications

General

Brand	JONATHAN Y
Model	JYL2040A
Category	Home Lighting
Type	Table Lamp
Height	24 inches
Shade Material	Linen
Shade Color	White
Bulb Type	LED
Bulb Included	Yes
Number of Lights	1
Voltage	120V
Weight	5 pounds
Wattage	60 watts

Summary

General Warnings and Safety

Electrical Installation Recommendation

Recommends installation by a licensed electrician and switching off the main electrical supply before installation.

Pre-Installation Inspection

Inspect the item carefully for damage or defects before installation; do not install if issues are found.

Care and Maintenance

Important Safety Instructions

Assembly and Usage Precautions

Ensure all parts are present, assemble on a soft surface, and follow guidelines for safe use and installation.

Cord and Plug Safety Features

The external flexible cord cannot be replaced; the lamp has a polarized plug for electrical shock reduction.

Part List and Hardware

Preparation and Assembly Steps

Preparation Before Assembly

Verify all parts are present against the contents list before beginning assembly.

Bulb Type Recommendation

Use specified ON/OFF type 'A' bulb (max 100W) or CFL (max 23W) or LED (max 12W).

Step 1: Base and Neck Assembly

Connect the Neck (B) to the Base (A) by screwing them together securely without twisting the power cord.

Step 2: Shade and Finial Assembly

Insert Harp (E) into Saddle (C), place Shade (F) on Harp, tighten Finial (G), and insert Bulb (H) into Socket (D).

Step 3: Final Stability Check

Place the assembled lamp on a level surface to ensure it is stable.