1.To prevent affecting the working performance of the machine, it is recommended to
regularly clean and maintain the machine body, floor brush, dirt suction port, and
wastewater tank;
2.Before cleaning, stop the machine and clean the machine body with a cloth dipping in
water or neutral detergent; please wring out the cloth to avoid water stains penetrating
the inside of the machine;
3.Wastewater tank cleaning: Please clean the wastewater tank timely every time after
use, and clean the upper cover and filter of the wastewater tank regularly.
☼
Remove the filter, wash
with clean water, and dry
4.Clean the water jet port on the roller brush cover and the roller brush.
• Users can clean the water spray port on the roller brush cover regularly according to the
use conditions to avoid accumulation and scaling of stains to affect water flow.
• Remove the roller brush regularly for cleaning and drying to avoid long-term
micro-wetness of roller brush resulting in odor.
Remove the upper cover
Maintenance and Service
Remove the upper
cover of roller brush
Rinse the upper cover
of roller brush
Remove the roller brush
1.Turn the end cap knob
2. Pull out the
roller brush
Wash with clean
water and dry
Install the roller brush
Install the upper cover
of the roller brush
1. Install the
roller brush
2. Tighten the
end cap knob
12
To Next Page
Loading...
