Handle Diseassembly
Insert the end of the aluminum tube
vertically into the hole on the host until
a “click” sound is heard, and make sure
that the tube is tightly inserted, indicating
that it is installed successfully.
To remove the aluminum tube of the
handle, insert a long, thin, and rigid
object into the hole in the back of the
body to press the elastic sheet while
pulling the machine handle upwards.
Click
Installation
Insert the end of the handle vertically
into the bore of the aluminum tube until
a “click” sound is heard, and make sure
that the handle is tightly inserted,
indicating that it is installed successfully.
7
To Next Page
Loading...
