Need help?Do you have a question about the Jonsered 2050 turbo and is the answer not in the manual?
General| Power output | 2.4 kW |
|---|---|
| Weight | 5.1 kg |
| Fuel tank volume | 0.5 L |
| Chain pitch | 0.325 inches |
| Oil tank volume | 0.3 litre |
| Engine displacement | 49.4 cm³ |
Explains symbols found directly on the chain saw for warnings and operation.
Details symbols used within the manual to convey instructions and warnings.
Lists essential protective gear required for safe chain saw operation.
Describes the built-in safety features of the chain saw and their functions.
Outlines procedures for checking and maintaining safety features for reliable operation.
Covers selection and maintenance of bars and chains for optimal performance and safety.
Explains the causes of kickback and techniques to prevent it, ensuring user safety.
Provides fundamental safety rules for operating a chain saw in various conditions.
Details precautions for handling fuel and oil to prevent fire and ensure safe operation.
Offers practical guidance and techniques for performing tasks safely with the chain saw.
Step-by-step instructions for attaching the guide bar and chain to the saw.
Instructions for installing a spike bumper, a safety and control accessory.
Guidelines for mixing the correct fuel-oil ratio and selecting appropriate petrol.
Information on selecting and using the correct chain lubrication oil.
Safe procedures for refuelling the chain saw to prevent fire hazards.
Detailed steps for safely starting the chain saw, both cold and warm engines.
Instructions on how to properly shut down the chain saw engine.
How to adjust and maintain the carburettor for optimal engine performance.
Procedures for changing or repairing the starter cord and recoil spring.
Instructions for cleaning and replacing the air filter to ensure proper engine function.
Guidance on checking, cleaning, and replacing the spark plug for reliable starting.
Information on the muffler's function and maintenance, including spark arrestor screens.
Details on lubricating the needle bearing in the clutch drum for longevity.
How to clean and maintain the cooling system to prevent engine overheating.
Special measures required for operating the saw in cold weather conditions.
Routine checks to perform before or after each use for safety and performance.
Checks and maintenance tasks to be performed on a weekly basis.
Periodic maintenance tasks to ensure the saw's continued reliability.
To Next Page
