Need help?Do you have a question about the Jonsered 2071 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Power Output | 4.4 kW / 6.0 hp |
| Displacement | 70.7 cm³ |
| Bar Length | 15-20 inches (38-50 cm) |
| Weight | 6.6 kg |
Explains important safety symbols used in the operator's manual and on the equipment.
Covers reading instructions, checking equipment, refueling, and chain oil levels before operation.
Details the essential protective gear required for safe chainsaw operation.
Explains safety features, their function, and basic inspection/maintenance.
Procedures for inspecting and maintaining key safety features of the chainsaw.
Guidelines for choosing, maintaining, and using cutting equipment safely.
Instructions on sharpening the chain and adjusting raker clearance for optimal performance and safety.
Procedures for lubricating cutting equipment and checking for wear.
Guidance on bar maintenance and critical techniques to avoid dangerous kickback.
Essential precautions for safe operation, including fuel handling, starting, and general working practices.
Techniques for safe cutting, limbing, and felling trees, including preparation and execution.
Methods for safely freeing a tree that has fallen badly or become trapped.
Identifies and labels all major components of the Jonsered 2054 chainsaw.
Step-by-step instructions for correctly mounting the guide bar and saw chain onto the chainsaw.
Guidance on mixing gasoline and two-stroke oil, and requirements for chain oil.
Explains the automatic oil pump system, its maintenance, and flow adjustment.
Safe procedures for fuelling the chainsaw, including precautions against fire hazards.
Step-by-step guide for starting both cold and warm engines, including safety checks.
How to safely stop the engine using the stop switch.
Instructions for adjusting and maintaining the carburetor for optimal engine performance.
Procedures for maintaining the starter device, including cord and recoil spring.
Maintenance for air filter, spark plug, and needle bearing for engine longevity.
Maintaining the cooling system and precautions for winter operation.
Routine maintenance tasks scheduled daily, weekly, and monthly for upkeep.
Provides detailed technical specifications for the engine and fuel/lubrication systems.
Lists recommended cutting equipment combinations for kickback and vibration compliance.
Explains the emission control system warranty, coverage, and owner responsibilities.
Outlines owner duties for maintenance and conditions not covered by the warranty.
To Next Page
