Need help?Do you have a question about the Jonsered Classic 2050 and is the answer not in the manual?
Explains warning symbols and safety icons found on the chain saw itself.
Details the meaning of various symbols used within the operator's manual for clarity.
Outlines essential protective gear required for safe chain saw operation to minimize injury risk.
Describes the safety features of the chain saw and their functions for secure operation.
Guides users on how to check and maintain the chain saw's safety features for optimal performance.
Details fundamental guidelines, rules, bar and chain specifications for cutting equipment.
Guides users on how to properly sharpen cutting teeth and adjust raker clearance for efficient cutting.
Covers the importance of proper chain tensioning and lubrication for safe operation.
Covers checking chain lubrication, bar tip sprocket, and wear on cutting equipment and drive sprocket.
Defines kickback, the sudden reaction of a chain saw, and its potential causes.
Provides essential techniques and practices to prevent kickback incidents during chain saw operation.
Outlines essential safety rules for chain saw use, including fuel handling and starting procedures.
Offers practical advice and rules for safe and effective chain saw operation and cutting methods.
Details procedures for safe tree felling, including safe distances, felling direction, and trunk cutting.
Step-by-step instructions for correctly attaching the guide bar and chain to the chain saw.
Guidance on correctly mixing fuel and oil and safe procedures for refuelling the chain saw.
Instructions for safely starting the chain saw engine, covering both cold and warm engine starts.
Explains the correct procedure for safely shutting off the chain saw engine.
Covers adjusting the carburettor and maintaining the starter device for optimal engine performance.
Details cleaning and maintenance of the air filter, spark plug, cooling system, and silencer for engine health.
Provides a schedule for daily, weekly, and monthly maintenance checks to ensure the chain saw's reliability.
Lists technical specifications including engine details, noise, vibration, and bar/chain combinations.
To Next Page
General