To Next PageTo Next Page
Need help?Do you have a question about the Jonsered CS 2137 and is the answer not in the manual?
General| Displacement | 36.3 cm³ |
|---|---|
| Chain pitch | 3/8" |
| Oil tank volume | 0.2 l |
| Recommended bar length | 35-40 cm |
| Fuel tank volume | 0.25 l |
Identifies the front handle and hand guard for safe operation.
Identifies the ON/STOP switch, primer bulb, and starter rope.
Identifies the chain brake, nuts, and related parts.
Identifies the guide bar, chain, and its direction.
Explains key symbols for safe operation and warnings.
Outlines essential safety rules before operating the saw.
Details required protective gear for safe chainsaw operation.
Covers safe handling, user restrictions, and work area safety.
Emphasizes keeping the saw in good working order and authorized service.
Provides critical safety rules for handling fuel and refueling.
Details safe practices for storing and handling fuel.
Explains the causes and types of kickback.
Provides methods to minimize the risk of kickback.
Offers tips for maintaining control during operation.
Describes proper grip and stance for safe operation.
Highlights the danger zone on the guide bar tip.
Lists features designed to reduce kickback.
Explains the purpose and limitations of the chain brake.
Instructions for attaching the bumper spike.
Step-by-step guide to attaching the guide bar and chain.
Details on adjusting chain tension during assembly.
Explains how to adjust chain tension correctly.
How to verify the chain tension is adequate.
Importance and method of lubricating the bar and chain.
Guidance on safely refueling the chainsaw.
How to engage and disengage the chain brake.
Step-by-step instructions for starting a cold engine.
Instructions for starting a warm engine.
Guidance for starting a flooded engine.
Important warnings about chain brake wear and maintenance.
Describes how to check the chain brake function.
Explains how the inertia chain brake activates.
Key points for safe and effective cutting.
Principles for safely felling trees.
Steps for planning a safe tree felling operation.
How to make a notch cut for tree felling.
Techniques for cutting fallen trees into logs.
How to buck logs that are not supported.
How to buck logs using support stands.
Specific methods for bucking with support.
Key advice and warnings for bucking operations.
Techniques for removing branches from a felled tree.
Step-by-step guide for pruning branches.
Checklist for regular maintenance tasks.
Procedure for cleaning the air filter.
Steps for maintaining the guide bar.
How to replace the spark plug.
Recommendation for professional chain sharpening.
Guidelines for adjusting the carburetor.
Procedure for adjusting idle speed using screw T.
Important precautions for storing the chainsaw.
Table of common problems, causes, and remedies.
Details on engine size, speed, and power.
Information on the ignition system components.
Details on fuel capacity and oil pump.
Measured noise and vibration levels.
Information on bar lengths, chain pitch, and speed.
