Need help?Do you have a question about the Jonsered CS 2153C and is the answer not in the manual?
General| Weight (excluding cutting equipment) | 5.2 kg |
|---|---|
| Fuel tank volume | 0.5 liters |
| Sound power level | 115 dB(A) |
| Oil tank volume | 0.3 l |
| Chain pitch | 3/8 inch |
Describes symbols found on the chainsaw itself, indicating safety warnings and features.
Explains symbols used within the operator's manual for instructions and warnings.
A greeting and introduction to the product and manual, emphasizing satisfaction and longevity.
Covers critical warnings, important notes, and common sense usage for safe operation.
Details required safety gear for operator protection against potential injuries.
Explains the chainsaw's safety mechanisms like chain brake, hand guards, and vibration damping.
Focuses on safe selection, use, and maintenance of bars and chains to prevent accidents.
Guides on sharpening cutting teeth and setting depth gauges for optimal performance.
Instructions for maintaining chain lubrication and correct chain tension to prevent snapping.
Details how to inspect bars and chains for wear, damage, and cracks for safe operation.
Step-by-step guide on installing the bar and chain correctly onto the chainsaw.
Information on petrol types, two-stroke oil, and correct fuel mixture ratios for engine operation.
Safe practices for refuelling the machine, including ventilation and fire prevention.
Procedures for starting the engine from cold and warm states, including choke and decompression.
How to safely shut down the engine using the stop switch.
Essential inspections before starting any work with the chainsaw for operator and machine safety.
Basic rules and advice for safe chainsaw operation, including stance and environment awareness.
Covers limbing, general cutting, and tree felling methods, including log support and tension.
Explains kickback causes, the kickback zone, and techniques to prevent it.
Guides on adjusting the engine's fuel-air mixture for optimal performance and emissions.
Procedures for inspecting and maintaining safety features like brakes, guards, and throttle lockout.
Instructions for servicing the recoil starter mechanism, including cord and spring replacement.
Maintenance for air filters and spark plugs to ensure engine health and starting.
Details on oil pump adjustment, bar tip lubrication, and cooling system cleaning.
Advice for winter use and operation of heated handles/carburettors to prevent issues.
A summary of daily, weekly, and monthly maintenance tasks for the chainsaw.
Lists engine, fuel capacity, noise emissions, and vibration data for different models.
Approved combinations of bars and chains, including pitch and gauge, for the chainsaw.
Official statement of compliance with relevant European directives for machinery and emissions.
To Next Page
