KEY
T
O SYMBOLS
English
–
7
1153135-26
Rev
.1
2009-12-29
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use can
result in ser
ious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and mak
e sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicab
le EC directives.
Noise emission to the environment
according to the European
Comm
unity’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
Both of the operator
′
s hands must be
used to operate the chain saw.
Never operate a chain saw holding it with
one hand only
.
Contact of the guide bar tip with any
object m
ust be avoided.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
Chain brake, activated (right)
Chain brake, not activated
(left)
Other symbols/decals on
the machine refer to special
cer
tification requirements
for certain markets.
Symbols in the operator’
s
man
ual:
Switch off the engine bef
ore
carr
ying out any checks or
maintenance. NB! The start/stop
switch automatically returns to run
position. In order to prevent
unintentional starting, the spark
plug cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
glo
ves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
wo
rn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain sa
w is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
To Next Page
Loading...
