15
English
DESCRIPTION
Rail stops
Rail guards (14)
21
A
14
3
The rails have two rail stops (A) at each end. The
stops consist of bolts secured in the rails.
The saw carriage is equipped with four rail
guards which run over the rail. The rail guards
are de-signed to keep the rail clean and prevent
squeeze injuries between wheel and rail.
Stop control (21)
A stop control is fitted on the right-hand handle.
This control also functions as an emergency
stopping device.
Chain guard (3)
The chain which unites the two threaded height-
adjustment rods is equipped with a guard in the
form of a plastic cowl, which is secured by two
screws.
To Next Page
Loading...