Jonsered 6000+ - Technical Particulars; Motor Specifications; Noise and Vibration Levels; Ignition and Fuel Systems

45
English
TECHNICAL PARTICULARS
Motor
Saw blade
Manufacturer: Electrolux
Type of ignition system: ET
Spark plug: Champion
RCJ 6Y
Electrode gap, mm: 0.5
Ignition system
Blade speed: 30 m/s
Pitch: 25 mm
Width: 35 mm
Thickness, mm: 1 mm
+ setting
Length, mm: 3 570 mm
Starting at, rpm: 3 700
Ordering number: 531 0194-65
Max. log height, mm: 600
Max. log width, mm: 500
Rec. speed when sawing, rpm: 8 500-9 500
The max. permissible log length is contingent on the
number of rail sections fitted.
Height adjustment crank, mm/turn: 5
Pitch disc, resolution, mm: 1
Sawing
Noise levels
Equivalent (see Note 1) noise pressure
level at operator's ear, measured
according to relevant international
standards, dB(A): 95,4
Equivalent (see Note 1) noise power
level, measured according to relevant
international standards, dB(A): 107,8
Vibration level in left steering handle
(see Note 2), m/s
2
: 2,4
Vibration level in right steering handle
(see Note 2), m/s
2
: 2,7
Note 1: Equivalent noise level is, according to ISO
7182 and ISO 9207, calculated as the time-weighted
energy total for noise levels under various working
conditions with the following time distribution: 1/2
idle, 1/2 full load.
Note 2: Equivalent vibration level is, according to
ISO 7505, calculated as the time-weighted energy
total for vibration levels under various working
conditions with the following time distribution: 1/2
idle, 1/2 full load.
Grinding motor, technical data
Voltage: 12 V
Motor speed: 2 800 rpm
Periphery speed: 22 m/sec
Power: 90 W
Rated current: 7,5 A
Grinding disc: 150x6x16 mm (531 01 32-66)
Fuse: 12 A
Fuse: 0,25 A
Weight: 8,24 kg
Sharpening tool: 531 01 32-63
Motor data Grindlux 4000
Carburetor: Tillotson
Carburetor, type: H265A
Fuel tank, volume, liters: 2,5
Fuel: See page 23
Cleaning liquid tank, volume, liters: 2,5
Cleaning liquid: Dish washing detergent
Fuel and lubrication system
Saw carriage: 96 kg
Two rail sections: 115 kg
Compl. sawmill w. 2 rail sections: 223 kg
Weights
Cylinder volume, cm
3:
93,6
Cylinder bore, mm: 56
Stroke, mm: 38
Idling speed, rpm: 2 400
Rec. max. speed, run-in, rpm: 12 300
Rec. max. speed, rpm: 12 960
Power, kW/rpm: 5,0/9000
Technical particulars