27
English
GENERAL USE
Measure the top of the log and determine how
the log must be cut to to yield the lumber
required. Take the thickness of the saw blade
into account in your calculations.
Saw-blade thickness = 2 mm.
Calculating the yield
!
WARNING!
Use the following protective gear
whenever you use the saw:
• Boots or shoes with steel toe
cap.
• Ear protection.
• Eye protection.
• A first aid kit must be kept
nearby.
Before starting the motor, check
that:
• All of the guards are fitted and
are in faultless condition.
• No unauthorised persons may
be within the risk zone.
1. Use the crank (1) to set the saw blade height.
2. Brush off the logs to prevent unnecessary
wear of the saw blade.
3. Locate the blade guide (13) as close as
possible to the log without coming in contact
with it. Tighten the knob (11) to lock the
blade guide in position.
4. Check the cleaning liquid level in the tank (8)
and if necessary add more cleaning liquid.
Use cleaning liquid having lubricating
properties, for example dish washing deter-
gent and water in equal portions.
5. Check the petrol level in the fuel tank (15)
and fill with petrol, if necessary. See pages.
23-24.
Using the saw
1
15
13
11
8
To Next Page
Loading...