To Next PageTo Next Page
Need help?Do you have a question about the Jonsered 670 and is the answer not in the manual?
General| Ignition System | Electronic |
|---|---|
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 inch (1.3 mm) |
| Vibration Level (Front/Rear Handle) | Not available |
| Sound Power Level | Not available |
| Sound Pressure Level | Not available |
| Weight | 6.6 kg (14.5 lbs) without bar and chain |
Procedure for taking apart the chain brake from the chain saw.
Steps to release the chain brake mechanism.
Instructions for reassembling the chain brake components.
Specific dismantling steps for chain brake models 2054/2055.
Specific fitting steps for chain brake models 2054/2055.
Specific dismantling steps for chain brake models 2077/2083.
Specific fitting steps for chain brake models 2077/2083.
Procedure to verify the automatic function of the chain brake.
Procedure to check the chain brake's effectiveness.
Information about the chain catcher's role and maintenance.
Details on dismantling and fitting the throttle lock mechanism.
Steps for dismantling the starter unit from the engine.
Procedure for replacing the starter unit's return spring.
Instructions for replacing the starter cord.
Steps for assembling the starter unit components.
Procedure for replacing the starter pawls.
Procedure for checking the ignition spark.
Instructions for replacing the spark plug protection.
Steps for dismantling parts of the electrical system.
Information on dismantling and replacing starter pawls.
Steps for reassembling electrical system components.
Information and troubleshooting for electrically heated handles.
Procedure for replacing the generator unit.
Procedure for cleaning and replacing the air filter.
Explanation of the centrifugal cleaning process for the air filter.
Instructions for cleaning and replacing the fuel filter.
Detailed instructions for dismantling and fitting the carburettor.
Explanation of the carburettor's functional sections and design.
Procedure for adjusting the carburettor for optimal performance.
Information on checking and maintaining the fuel tank vent system.
A chart for diagnosing fuel system issues.
Steps for dismantling the centrifugal clutch for models 2036/2040.
Steps for fitting the centrifugal clutch for models 2036/2040.
Steps for dismantling the centrifugal clutch for models 2041/2045/2050.
Steps for fitting the centrifugal clutch for models 2041/2045/2050.
Steps for dismantling the centrifugal clutch for models 2054/2055.
Steps for fitting the centrifugal clutch for models 2054/2055.
Steps for dismantling the centrifugal clutch for model 625.
Steps for fitting the centrifugal clutch for model 625.
Steps for dismantling the centrifugal clutch for models 630/670, 2077, 2095.
Steps for fitting the centrifugal clutch for models 630/670, 2077, 2095.
Steps for dismantling the lubricating system for models 2036/2040, 2041/2045/2050.
Steps for fitting the lubricating system for models 2036/2040, 2041/2045/2050.
Steps for dismantling the lubricating system for model 2054/2055.
Steps for fitting the lubricating system for model 2054/2055.
Steps for dismantling the lubricating system for models 625/630/675.
Steps for fitting the lubricating system for models 625/630/675.
Steps for dismantling the lubricating system for models 2077/2083, 2095.
Steps for fitting the lubricating system for models 2077/2083, 2095.
Procedure for checking and maintaining the oil tank ventilation.
Procedure to check the chain lubrication pump's function.
A chart for diagnosing lubricating system issues.
General steps for dismantling cylinder and piston components.
Specific dismantling steps for cylinder/piston for models 2036/2040, 2041/2045/2050.
Specific fitting steps for cylinder/piston for models 2036/2040, 2041/2045/2050.
Specific dismantling steps for cylinder/piston for model 2054/2055.
Specific fitting steps for cylinder/piston for model 2054/2055.
Specific dismantling steps for cylinder/piston for models 625/630/670, 2077/2083, 2095.
General steps for fitting cylinder and piston components.
Information and fitting procedure for the decompression valve.
Specific fitting steps for cylinder/piston for models 625/630/670, 2077/2083, 2095.
Procedures for cleaning and inspecting cylinder and piston parts.
Diagnosing and analyzing cylinder/piston malfunctions and procedures.
Helpful tips for servicing cylinder and piston components.
Specifications for cylinder bore, piston ring gap, groove, and play.
Procedure for replacing the sealing ring on the magneto side.
Procedure for replacing the sealing ring on the clutch side.
Instructions for replacing the bar attachment bolts.
Information and replacement procedures for vibration dampers.
Dismantling and checking the tank unit and crankshaft for model 2036/2040.
Dismantling and checking the crankcase and crankshaft for models 2041/2045/2050.
Dismantling and checking the crankcase and crankshaft for model 2054/2055.
Dismantling and checking the crankcase and crankshaft for models 625/630/670.
Dismantling and checking the crankcase and crankshaft for models 2077/2083.
Dismantling and checking the crankcase and crankshaft for model 2095.
Procedures for checking the crankshaft for wear and damage.
Procedure for testing the tightness of the crankcase and related components.
Tools required for servicing the oil pump.
Tools required for servicing the generator.
Tools required for servicing the clutch.
Tools required for servicing vibration dampers.
Tools required for servicing the crankshaft.
Tools required for fitting and removing ball bearings.
Tools required for fitting and removing sealing rings.
Tools required for cylinder and piston maintenance.
Tools required for ignition system maintenance.
Tools required for crankcase maintenance.
Tools required for tightness testing procedures.
Tools required for chain brake maintenance.
Tools required for fuel pick-up maintenance.
General workshop equipment for use with the tools.
Specifications for various engine and component parameters.
Recommended tightening torques for various fasteners and components.
