Need help?Do you have a question about the Jonsered GR 2026 CL and is the answer not in the manual?
Provides a comprehensive guide to understanding the various symbols used throughout the operator's manual.
Identifies and labels all major components and parts of the Jonsered machine.
Crucial warnings and advice for safe operation of the machine.
Details the essential protective gear required for safe use of the machine.
Explanation of the machine's safety equipment and required checks.
Describes the function and operation of the throttle lockout and stop switch.
Information on the cutting guard's purpose, checks, and correct usage.
Explains the vibration damping system and its importance for operator comfort.
Guidance on the muffler's function, safety warnings, and maintenance.
Advice on selecting, maintaining, and safely using cutting attachments.
Details on the correct application and limitations of the locking nut.
Specific instructions for using trimmer heads and cutting cords.
Step-by-step guide for fitting the loop handle to the machine.
General procedures for correctly assembling cutting equipment.
Instructions for attaching the trimmer guard and Auto 32 trimmer head.
Guidance for installing alternative guards and cutting attachments.
Instructions for connecting and disconnecting the two-piece shaft.
Essential safety measures to prevent fire and injury when handling fuel.
Safe practices for transporting and storing the machine and fuel.
Information on recommended petrol types, octane ratings, and unleaded fuel.
Guidance on selecting and using appropriate two-stroke engine oil.
Detailed steps for correctly mixing petrol and two-stroke oil.
Instructions for safely refuelling the machine, including cooling time.
Essential checks to perform before starting the engine.
Basic steps for starting and stopping the machine's engine.
Specific instructions for starting the engine when it is cold.
Specific instructions for starting the engine when it is already warm.
Detailed procedure for pulling the starter cord to start the engine.
Method for safely switching off the machine's engine.
General advice and best practices for operating the trimmer.
Fundamental safety rules to follow while working with the machine.
Methods for effectively trimming grass with the trimmer head.
Techniques for sweeping debris and clearing unwanted vegetation.
Tips for cutting grass in areas hard to reach with a lawn mower.
Detailed instructions for adjusting the carburetor for optimal performance.
Explanation of the carburetor's role and its basic adjustment settings.
Procedure for fine-tuning the carburetor by a qualified person.
Steps for adjusting the idle speed screw (T) for correct operation.
Guidance on adjusting the high-speed jet (H) for engine performance.
Instructions for cleaning and maintaining the machine's muffler.
How to clean and maintain the machine's cooling system.
Procedures for cleaning, drying, and oiling the air filter.
Information on checking and topping up grease in the bevel gear.
Guidance on checking, cleaning, and replacing the spark plug.
Instructions for lubricating the drive shaft ends on two-piece shafts.
A detailed schedule of daily, weekly, and monthly maintenance tasks.
Detailed technical data including engine, fuel, and weight specifications.
Information on measured and guaranteed sound power levels.
Equivalent sound pressure levels at the operator's ear.
Data on vibration levels at the machine's handles.
List of approved cutting attachments and their corresponding guards.
Statement of compliance with European directives for machinery, EMC, and noise.
To Next Page
General
