Need help?Do you have a question about the Jonsered GR41 and is the answer not in the manual?
General| Power Output | 1.5 kW |
|---|---|
| Weight | 7.9 kg |
| Engine Type | 2-stroke |
| Cutting Width | 45 cm |
| Shaft Type | Straight shaft |
Explains various symbols and decals used on the machine for safety and certification.
Identifies and labels the various components of the GR41/GR50/RS44 clearing saw.
Identifies and labels the various components of the RS52 clearing saw.
Highlights critical safety advice and general warnings for operating the machine.
Details essential protective gear like helmets, hearing and eye protection, and gloves.
Advises wearing a helmet when clearing trees taller than 2 meters.
Recommends wearing hearing protection for adequate noise reduction.
Mandates approved eye protection, including goggles and visors.
Suggests wearing gloves when fitting cutting attachments.
Recommends wearing sturdy boots with steel toe-caps and non-slip soles.
Advises wearing strong fabric clothing, long pants, and securing hair.
Emphasizes the importance of having a first aid kit nearby.
Describes the machine's built-in safety features and their importance.
Explains the throttle lockout mechanism to prevent accidental throttle operation.
Details how to use the stop switch to safely turn off the engine.
Highlights the importance of the cutting attachment guard for operator safety.
Describes the system designed to minimize vibration during operation.
Explains the function of the quick release for emergency situations.
Details the muffler's role in noise reduction and exhaust management.
Provides instructions and warnings for using and tightening the locking nut.
Ensures the locking screw is tightened securely for support cups.
Guides on choosing and maintaining cutting equipment for performance and safety.
Covers essential rules for using cutting attachments and guards safely.
Instructions on how to properly sharpen grass cutters and blades.
Provides detailed instructions on how to sharpen saw blades correctly.
Offers important advice on using trimmer heads and trimmer cord correctly.
Step-by-step guide for assembling the handlebar and throttle for GR41/GR50 models.
Step-by-step guide for assembling the handlebar and throttle for RS44/RS52 models.
Instructions on how to adjust the handlebar for transport and storage.
Guidance on assembling cutting attachments, including safety warnings.
Instructions for fitting the blade guard, grass blade, and grass cutter.
Procedure for attaching the blade guard and saw blade.
Steps for attaching the trimmer guard and Trimmy SII trimmer head.
Instructions for fitting various other guards and cutting attachments.
Guide to adjusting the harness and attaching the clearing saw for optimal use.
Details on safety release, load spreading, and correct height for standard harness.
Instructions for vector harness safety release and adjustment.
Step-by-step guide for adjusting hip, chest, and shoulder straps.
Explains how to balance the machine for forestry clearing and grass clearing.
Covers critical safety measures for handling fuel, transport, and storage.
Details recommended petrol octane rating and usage with catalytic converters.
Specifies recommended types of two-stroke oil and mixing ratios.
Step-by-step guide for mixing petrol and two-stroke oil correctly.
Safety instructions for refuelling the machine, including fire prevention.
Essential checks to perform before starting the machine for safe operation.
Procedure for starting the engine when it is cold.
Procedure for starting the engine when it is already warm.
Detailed steps for starting the engine using the starter cord.
Instructions on how to safely stop the engine.
Basic safety precautions and advice for working with clearing saws and trimmers.
Covers essential rules like checking surroundings, removing debris, and safe movement.
Principles for effective clearing: equipment, adjustment, safety, and organization.
General advice on working methods, blade thrust, and clearing area preparation.
Detailed techniques for felling trees and cutting stems using a saw blade.
Techniques for cutting brush and hardwood stems with a saw blade.
Instructions for clearing grass and weeds using a grass blade.
Techniques for trimming grass, including trimming, clearing, and sweeping.
Explains carburettor function and provides guidance on adjustment procedures.
Details factory settings and initial adjustments for the carburettor.
Procedure for adjusting the idle speed screw (T) for correct operation.
Guide to adjusting the high-speed jet (H) for GR41/GR50/RS44 models.
Guide to adjusting the high-speed jet (H) for the RS52 model.
Describes the signs of a correctly adjusted carburettor.
Instructions for checking, cleaning, and maintaining the muffler, including spark arrestor mesh.
Details on cleaning the cooling system components to prevent overheating.
Guidance on cleaning and replacing the air filter to ensure optimal engine performance.
Information on checking and maintaining the bevel gear grease.
Guidance on spark plug condition, cleaning, gap adjustment, and replacement.
A comprehensive schedule detailing daily, weekly, and monthly maintenance tasks.
Detailed technical specifications for GR41 and GR50 models, including engine, noise, and vibration.
Presents measured sound power and sound levels for the machine.
Provides measured vibration levels at the handles for different operating conditions.
Detailed technical specifications for RS44 and RS52 models, including engine, noise, and vibration.
Lists approved cutting attachments and corresponding guards for GR41/GR50 models.
Lists approved cutting attachments and corresponding guards for RS44/RS52 models.
Formal declaration of compliance with relevant EU directives for the clearing saws.
Step-by-step instructions for installing and using the Poly Trim cutting head.
Detailed instructions for winding and installing the Trimmy SII trimmer head.
Further steps for using and maintaining the Trimmy SII trimmer head.
Instructions for installing and using the Auto 55 cutting head.
Step-by-step guide for installing the Tap n'Go 45 trimmer head.
To Next Page
