English – 23
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Technical data GR 2026L/CL GR 2032L
Engine
Cylinder displacement, cm
3
26,9 30,8
Cylinder bore, mm 35 35
Stroke, mm 28 32
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 11000-11700 11000-11700
Speed of output shaft, rpm 10000 10000
Max. engine output, acc. to ISO 8893, kW/ rpm 0,9/9000 1,1/8400
Catalytic converter muffler Ye s Ye s
Speed-regulated ignition system Ye s Ye s
Ignition system
Manufacturer/type of ignition system Walbro CD Walbro CD
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Walbro WT Walbro WT
Fuel tank capacity, litre 0,5 0,5
Weight
Weight without fuel, cutting attachment and guard, kg L: 5,7 CL: 6,0 6,2
Noise emissions
(see note 1)
Sound power level, measured dB(A) 107 110
Sound power level, guaranteed L
WA
dB(A) 108 110
Sound levels
(see note 2)
Equivalent sound pressure level at the operator's ear,
measured according to EN ISO 22868, dB(A), min./max.:
95/99 92/100
Vibration levels
Vibration levels at handles, measured according to
EN ISO 22867, m/s
2
At idle, left/right handles, min.: 2,8/2,0 2,5/2,3
At idle, left/right handles, max.: 2,8/2,0 4,0/3,0
At max. speed, left/right handles, min.: 2,6/2,8 3,8/2,7
At max. speed, left/right handles, max.: 5,0/5,0 6,8/3,4
To Next Page
Loading...
Need help?
General
